Guy Lavy's Brodix heads

myclone

Donating Member
The only thing I can offer is a small amount of info I got while briefly checking into Brodix heads for the V6. I called Brodix and spoke with a pretty nice fellow (dont recall a name) that spent ~20min on the phone with me.

I learned:

If I bought the heads from a retailer rather than Brodix themselves I could get a pair that were fully machined, guides installed, and valve seats installed for ~1200 bucks. All I had to do was add the springs, valves, and screw in rocker arm studs.

The -8s do not have as large of a intake and exhaust port as the -10s but both are the same casting. In my case I was interested in the smaller ports to begin with and as my combo/tuning ability progressed more radical I could port them to provide the increased air flow. BTW, I dont recall this for sure but I believe they offer a -6 casting for the V6 also..

Thats about all I know or remember as I havent checked into the Brodix's for some time since Ive been side tracked with the other ~50 projects in the works.
 
Top