92TYPHOON937
Active member
Would a VGT turbo off a 6.7 liter cummins work on my 6 liter. I know that fleece performance or somethin like that makes a controller for them
had an idea
- Thread starter 92TYPHOON937
- Start date
Re: had an idea
the only turbo IMO that comes on a cummins worht using is what came on the pre93 12V's which was a holset h1c which is a t3 flanged 60 some odd front and something big out back full boost comes in at about 3K with a 2800 convertor and a nice cam should move well as long as it stays in rpm.
the only turbo IMO that comes on a cummins worht using is what came on the pre93 12V's which was a holset h1c which is a t3 flanged 60 some odd front and something big out back full boost comes in at about 3K with a 2800 convertor and a nice cam should move well as long as it stays in rpm.
92TYPHOON937
Active member
Re: had an idea
U dontg think being able to control the vgt would reduce lag if not eliminate it?
U dontg think being able to control the vgt would reduce lag if not eliminate it?
FlyingBrick
I have 3 pedals
Re: had an idea
i want to know where this goes... i have been looking into this for a while now, the number of of vgt's is growing in theory make zero lag and big boost possible on a small engine.... i know porsche is using vgt on some models
i want to know where this goes... i have been looking into this for a while now, the number of of vgt's is growing in theory make zero lag and big boost possible on a small engine.... i know porsche is using vgt on some models
92TYPHOON937
Active member
Re: had an idea
Well if I can get good info and think it may work I'm buyy one but it may be awhile till the truck runs I'm pputtin it on lol. They can be had fairly reasonable from the guys puttin monsters on their deisels lol
Well if I can get good info and think it may work I'm buyy one but it may be awhile till the truck runs I'm pputtin it on lol. They can be had fairly reasonable from the guys puttin monsters on their deisels lol
Re: had an idea
i will be going h1c on my setup and i will let you know where it goes from there these turbos holds up 30psi with no problem and i wont be anywhere near those #'s
i will be going h1c on my setup and i will let you know where it goes from there these turbos holds up 30psi with no problem and i wont be anywhere near those #'s
Re: had an idea
depends on how small it makes the housing volume when its at its lowest setting really. Which turbo exactly? I'd like to see some specs on it...
depends on how small it makes the housing volume when its at its lowest setting really. Which turbo exactly? I'd like to see some specs on it...
92TYPHOON937
Active member
Re: had an idea
The turbo is the stock turbo. On the newer 6.7 l cummins motors will see if I can find specs but I leave tomorrow on my cruise so it mite be a few days
And dgoodhue I know what ur sayin but I'm goin try n do some reasearch before I get to that point n that will be a lil while
The turbo is the stock turbo. On the newer 6.7 l cummins motors will see if I can find specs but I leave tomorrow on my cruise so it mite be a few days
And dgoodhue I know what ur sayin but I'm goin try n do some reasearch before I get to that point n that will be a lil while