HELP! hopefully valve lash

Osmosis

New member
Re: HELP! hopefully valve lash

Your not going to know unless you open up that valve cover. Well, that is if you have had a stud pull which I doubt, but is possible. Our injectors are know for a loud ticking noise, are you sure that's not what you are hearing?

For valve lash, I purchased a set of splash guard clips which you can put on the end of each rocker which deflects the oil back into the head. You can lash each valve while the car is running with the splash guard clips. If you don't have the clips, oil will get everywhere! I think you can get them at PNAT or any reputable auto part store. Just make sure you warm the engine up, then lash the valves when the car is idling. I usually back the nut off one full turn after she starts clicking, then slowly tighten the nut till it stops and then I give it 1/8 of a turn. That has alwayw worked well for me.

Keep us informed on what you find :tup:
 
Top