help picking turbo

atomicmecha

I hate rust
Re: help picking turbo

Hmm... maybe I should go custom cam then. Should be about the same price I'm guessing?

Thinking vortec heads, 1.6 rollers, behive springs and all the normal goodies to go with. Like I said, the turbo is the last piece of the puzzle because I was going to go with comp cam's 09-422-8 and be happy.

I'm still in the early planning stages. Atm, all I have is the heads from a junk yard 92 blazer.

Ultimate goal is an 11 second weekend cruiser that will rarely see the strip. Want something that can do 75 from here to florida and back. But if and when I ask it to, it'll smoke these local ricers. Or at least make them do a double take when they see me still beside them. :rotf:
 

Darin

New member
Re: help picking turbo

I misread where you said that you hated the 2800 stall, I thought you said you liked it.

Forgive me :)

I would agree, a 10 or 12 cm in a 11 or 9 bladed TD06H and a 60-1 (billet or regular) would suit you fine. Even one of the billet 20G wheels would work well.
 

Syclone #1188

New member
Re: help picking turbo

I would go with a 60-1 billet wheel. http://shopping.kinugawaturbo.com/mitsubishitd05td06turbocompressorbilletwheelgarrett60-1.aspx

This compressor cover http://shopping.kinugawaturbo.com/turbocompressorhousing24td0620gtrustsgmc-1.aspx

This turbine wheel. http://shopping.kinugawaturbo.com/t...sl220g11bladesubarudsmlighter9blades-1-1.aspx

You will have to get your 8 CM turbine housing machined to fit the larger turbine wheel.

You could just buy a completer center section like this & ask for a billet wheel & 9 bladed turbine wheel (for additional cost)
http://www.ebay.com/itm/Turbo-Cartr...Parts_Accessories&hash=item2a3ba6f0f2&vxp=mtr

The problem when the Buick GN & Turbo T-Type guys had early on, there was not much in selection on different size A/R's for the turbine housings, that and the stock class wanted a turbo to look stock on the outside but has a larger better flowing turbine housing. A "Cheater" turbo.

Getting back, since you want to use a stock converter, & want more power, you need to allow the engine to breath better in the exhaust, the one way to do it is to install a larger better flowing turbine wheel.
Using your small 8 CM turbine housing will have no problem spooling up a larger turbine wheel & larger 60-1 compressor wheel.

I ordered a 60-1 wheel and cover from these guys about two weeks ago. Im not impressed with the service I received. They sent the wrong wheel then couldnt get the correct one because they didnt have them in stock. I asked two times when they would be in stock. I keep getting the reply (do you want a refund?) I sent the wheel and cover back to the ebay seller (authentic-boosting)

Has anyone else purchased anything from them? Maybe it was just bad luck and caught them on a bad week?
 

It's just a six

Super Member
Re: help picking turbo

You could order direct from Kinugawa
or contact MSN online service: kinu766@hotmail.com (Bruce)

As far as porting/relieving the wastegate port entry, I would only make a larger radius's on the forward & aft port wall. Do not grind down too much of the closest port wall, that could cause turbulent exhaust flow.

As far as your combo using vortec 96 & newer heads, larger cam etc, IMO even a 20G billet wheel will not flow enough, the 20G wheel is just a bit bigger than a stock compressor wheel.:2cents:


How many lbs a minute does a billet 20G wheel flow anyways? Anyone?
 

Syclone #1188

New member
Re: help picking turbo

You could order direct from Kinugawa
or contact MSN online service: kinu766@hotmail.com (Bruce)


As far as your combo using vortec 96 & newer heads, larger cam etc, IMO even a 20G billet wheel will not flow enough, the 20G wheel is just a bit bigger than a stock compressor wheel.:2cents

Went to the Kinugawa site and found this turbo..what do you think? Seems kinda pricey for a Taiwan turbo?
http://shopping.kinugawaturbo.com/kinugawaturbohyundaigenesistd05h16g300ps-3-1-1-1-1-1-1-1-2-1.aspx $1099 with billet wheel, 9 blade wheel exhaust, 10cm housing

Id like to know if anyone has purchased any of their products?
I googled this company(Kinugawa) and the ebay dealer I had problems with (authentic-boosting) have the same phone number and address.
 
Last edited:

It's just a six

Super Member
Re: help picking turbo

Went to the Kinugawa site and found this turbo..what do you think? Seems kinda pricey for a Taiwan turbo?
http://shopping.kinugawaturbo.com/kinugawaturbohyundaigenesistd05h16g300ps-3-1-1-1-1-1-1-1-2-1.aspx $1099 with billet wheel, 9 blade wheel exhaust, 10cm housing

Id like to know if anyone has purchased any of their products?
I googled this company(Kinugawa) and the ebay dealer I had problems with (authentic-boosting) have the same phone number and address.

That looks like the correct turbo components & correct mods I would use for a knock off Mitsubishi turbo.:tup:
They must have just added that option?

If you were to purchase all Mitsubishi products with the similar spec turbo, it would be over $2000.

I have not used there products but Don here is currently using one of there 11 bladed turbine wheels & ran his best times ever.

I am going to purchase some products from them.:tup:

Personally I think it's pretty cool you can order a knock off turbo w/the aftermarket better flowing wheels.

There have been many people (even car magazine write ups & builds) purchase those cheaper China turbos on Ebay for 200-400 dollars & work perfectly fine, sure they are not as good as a Garrett, Turbonetics, bulleye etc, but the price is cheap, & the name brand turbos are going to cost you, & those turbos fail also, they are not bullet proof.

What is nice about the kinugawaturbo. is that they should just bolt on, no need to fab a downpipe or other pieces , or need an adaptor like you would w/a name brand turbo or those cheaper Ebay turbos.

It all depends on what you can afford, yes 1100 for a china turbo is pricey, but if it works good-great I think it is worth it.

I think anyone who orders a turbo or components from them, should contact the seller before buying it online, make sure they have the item/s in stock, ask about the return policy etc.
Just make sure to get all your questions lined up & answered before you order from them. It is after all a $1100 purchase for a complete turbo & $1100 is not something I have just lying around, it is a big purchase IMO.
:2cents:

Also, if you do not get your questions answered, or just seem to get the run around, I would not purchase from them, they seem to need to pump up/revamp there customer service.
 
Last edited:

QWERTYphoon

Motley Driver Award 2009
Re: help picking turbo

People have had the stock turbo well into the 11's I'm in the middle of a big rebuild right now and went stock turbo upgraded with the sportmachines billet wheel and some other goodies they offer. I also talked to Alex at Steve morris and had them hook me up. I hope to have it running in the next week but my research has come up with this being a good combo

I know of only one person getting a Syclone into the 11's with a stock turbo. Barely! Who else has got a stock turbo truck into the 11's besides Jeremy Duncan?
 

atomicmecha

I hate rust
Re: help picking turbo

Sounds like a good option while under a budget is to just upgrade the stock turbo a bit...


so with that in mind, looking at the links posted above. Would keeping the stock turbo center and upgrading the compressor wheel to the Garrett 60-1 (http://shopping.kinugawaturbo.com/mitsubishitd05td06turbocompressorbilletwheelgarrett60-1.aspx), and housing to one that supports the 60-1 wheel (http://shopping.kinugawaturbo.com/turbocompressorhousing24td0620gtrustsgmc-1.aspx), while also upgrading the turbine housing to a 20g 10cm (http://shopping.kinugawaturbo.com/k...ate49179-5490049179-04100.aspx?variation=4757) plus new turbine wheel and shaft to match (http://shopping.kinugawaturbo.com/turboturbinewheelmitsubishitd06h20gturbocharger-2.aspx) be a good option? Still learning this stuff, but from info in this post and else where, sounds like this would be a quicker spooling turbo and provide a better boost when paired with vortec heads (early vortecs, 1st gen L35 not 2nd gen LF6's).

Would that combo even work? I can always email Kinugawa about it, but if anyone here can tell me (and help me) build a good kit, would be quicker. :tup: And it seems like a nice upgrade for ~$600


Also guessing that with that 20g turbine housing upgrade, a new downpipe would be in order?
 

It's just a six

Super Member
Re: help picking turbo

Sounds like a good option while under a budget is to just upgrade the stock turbo a bit...


so with that in mind, looking at the links posted above. Would keeping the stock turbo center and upgrading the compressor wheel to the Garrett 60-1 (http://shopping.kinugawaturbo.com/mitsubishitd05td06turbocompressorbilletwheelgarrett60-1.aspx), and housing to one that supports the 60-1 wheel (http://shopping.kinugawaturbo.com/turbocompressorhousing24td0620gtrustsgmc-1.aspx), while also upgrading the turbine housing to a 20g 10cm (http://shopping.kinugawaturbo.com/k...ate49179-5490049179-04100.aspx?variation=4757) plus new turbine wheel and shaft to match (http://shopping.kinugawaturbo.com/turboturbinewheelmitsubishitd06h20gturbocharger-2.aspx) be a good option? Still learning this stuff, but from info in this post and else where, sounds like this would be a quicker spooling turbo and provide a better boost when paired with vortec heads (early vortecs, 1st gen L35 not 2nd gen LF6's).

Would that combo even work? I can always email Kinugawa about it, but if anyone here can tell me (and help me) build a good kit, would be quicker. :tup: And it seems like a nice upgrade for ~$600


Also guessing that with that 20g turbine housing upgrade, a new downpipe would be in order?

Those parts are the ones I would get except for the turbine wheel, you selected an 11 bladed unit, I would get this one, a 9 bladed lighter better flowing turbine wheel.
http://shopping.kinugawaturbo.com/t...sl220g11bladesubarudsmlighter9blades-1-1.aspx

They offer the complete turbo brand new for $1099.00
If you use your own center section, you still need a rebuild kit & I would get it all rebalanced just to be safe.

Those parts should all fit. But, contact them just to make sure.:2cents:
 

dgoodhue

BuSTeD 4.3
Re: help picking turbo

Chuck Bloosom (SP) Ran mid 11's w/stock turbo IIRC.

It was also a light weight purpose built Syclone with a built motor, cams, heads. I would say that most Syclone's are not going to run 11's on a stock turbo. Mid 12's or a little quicker is realistic.
 

BLACK92TY

It's never enough
Re: help picking turbo

Those parts are the ones I would get except for the turbine wheel, you selected an 11 bladed unit, I would get this one, a 9 bladed lighter better flowing turbine wheel.
http://shopping.kinugawaturbo.com/t...sl220g11bladesubarudsmlighter9blades-1-1.aspx

They offer the complete turbo brand new for $1099.00
If you use your own center section, you still need a rebuild kit & I would get it all rebalanced just to be safe.

Those parts should all fit. But, contact them just to make sure.:2cents:

You mentioned you were running the 10cm housing but the top end wasn't there until you went to a 12cm housing. Their complete kit only offers 8cm and 10cm. Might seem like a dumb question but without doing your own rebuild how would you convert to 12cm?
 

syclone809

Member
Re: help picking turbo

They sell a 12cm twin scroll that accommodates the upgraded TD06H turbine wheel and should hook up to stock downpipe. I was planning on getting the 60-1 billet wheel and compressor cover with this turbine housing and building my own hybrid, but after seeing final costs, there is a local turbo guy that will build me ANY size turbo w/billet wheel for $900.


http://shopping.kinugawaturbo.com/t...gawamitsubishitd06hte06h12cmt3twinscroll.aspx
 

atomicmecha

I hate rust
Re: help picking turbo

Those parts are the ones I would get except for the turbine wheel, you selected an 11 bladed unit, I would get this one, a 9 bladed lighter better flowing turbine wheel.
http://shopping.kinugawaturbo.com/t...sl220g11bladesubarudsmlighter9blades-1-1.aspx

They offer the complete turbo brand new for $1099.00
If you use your own center section, you still need a rebuild kit & I would get it all rebalanced just to be safe.

Those parts should all fit. But, contact them just to make sure.:2cents:

They sell a 12cm twin scroll that accommodates the upgraded TD06H turbine wheel and should hook up to stock downpipe. I was planning on getting the 60-1 billet wheel and compressor cover with this turbine housing and building my own hybrid, but after seeing final costs, there is a local turbo guy that will build me ANY size turbo w/billet wheel for $900.


http://shopping.kinugawaturbo.com/t...gawamitsubishitd06hte06h12cmt3twinscroll.aspx


I was looking at the twin scroll as well... would that work with the 9 blade?

And even with the rebuild kit, I'm still coming out cheaper than a new turbo. I think. I feel like I'm getting more boost for my buck.

Maybe for now I should keep the stock turbine housing and blade and just upgrade the compressor side?
 

It's just a six

Super Member
Re: help picking turbo

You mentioned you were running the 10cm housing but the top end wasn't there until you went to a 12cm housing. Their complete kit only offers 8cm and 10cm. Might seem like a dumb question but without doing your own rebuild how would you convert to 12cm?

You would have to find/buy a 12 CM turbine housing. Hard to find & they are not cheap.
The 12 CM housings Kinugawa sell are not internally waste gated, you would need to use an external wastegate.

I am thinking,,, if you buy there 10 CM housing & use there 9 bladed high flow turbine wheel, it will probably flow (exhaust wise) as good (maybe better) as my combo with a standard 12 bladed turbine wheel & 12 CM turbine housing.
It's just a thought, & have not proven this, but eventually I am going to add the 9 bladed turbine wheel & billet 60-1 compressor wheel to see if it actually will make more power.

Hope this helps.
 

It's just a six

Super Member
Re: help picking turbo

I was looking at the twin scroll as well... would that work with the 9 blade?

And even with the rebuild kit, I'm still coming out cheaper than a new turbo. I think. I feel like I'm getting more boost for my buck.

Maybe for now I should keep the stock turbine housing and blade and just upgrade the compressor side?

With there twin scroll & they even have a standard single entry 12 CM turbine housings, you would need to use an external wastegate.

If that is what you are looking for?

I am not sure if there 12 CM housings are machined to fit the larger "H" sized turbine wheels?

Remember, it's not only the compressor side that is backed up, the exhaust side is severely chocked also.
Adding a 9 bladed turbine wheel will really compliment a larger compressor wheel.
You would just need to have your 8CM stock turbine housing machined to fit the larger "H" size turbine wheel.
I would get it balanced also, just to have peace of mind.:2cents:
 

It's just a six

Super Member
Re: help picking turbo

It was also a light weight purpose built Syclone with a built motor, cams, heads. I would say that most Syclone's are not going to run 11's on a stock turbo. Mid 12's or a little quicker is realistic.

Yes it was lightened, also ran an aftermarket Accell DFI IIRC.

I have talked with guys that have run 12.4-12.8 seconds on completely stock Sy's.

I think if they would have tuned there Sy's w/code 59 they could have run high 11's to low 12's,.

My Sy stock ran 13.8's -14. @ a 3000 +FT altitude track, it was just like what other stock Sy's were running also.
I did ghetto tuning & very minor but high labor mods & got it down to 12.5's same track.

I think it's mostly all about the tune, & stay away from detonation & keep your intake charge as cool as possible.:2cents:

Thanks to you selling me the 12 CM housing, I am border line 11's:tup: Thanks again!
 

atomicmecha

I hate rust
Re: help picking turbo

Sorry for so many questions, but thanks for the advice and help! One more question...

Would it make more sense than for someone like me under a tight budget to stick with only upgrading to the billet wheel and compressor housing for now? So forget the turbine housing upgrade. Maybe still do the 9 blade tho...

I'm not after the 10's or anything (yet). Hell, high 11's would be a-ok to me. I've got a set of L35 heads that I'm going to rebuild and swap. Along with that is some other nice upgrades like 50lb injectors, exhaust, electric fans, etc. Once all that is on, I'm going to focus on tuning. I just want a good turbo to match the new heads and injectors. But I'd rather not spend half my budget on just the turbo when I can upgrade my current turbo for 2/3rds the cost.
 
Top