HELP!! Ultimate chip issues

AlaskaTy

New member
My ty is finally running ('bout time I graduate in a week) but with the fuel pressure at 50psi and the ultimate set to T1 15 it acted as if it was in valet mode. Throttle response is nill and when it finally musters up some go it is sluggish at every point. The weird part was that it shifted at 3800rpm. I have the 50# chip w/ some 50# injectors by the way. I still haven't figured out if I have the stock chip or if I have a pit bull chip. Is there any external demarcation that is different for stock chips and pitbull chips? I took some numbers off the "stock" chip:

On the external blue piece:
BBZB
1618
1579

On the chip's surface:
1621
3627
these two numbers can be seen through one of the holes in the blue piece

980
1606 9300
BLDP9208 1977

Is the pitbull a piggyback system? Because the chip I have in there isn't piggybacked. The reason I think it may be the pitbull chip is because i have a feeling the previous owner ordered the ATR stage 2 package (when I bought my car it had ATR 3" cat back, ATR aux IC, 160 deg t-stat, a cold air kit, a battery relocate kit)

But on a positive note, I drove my car for the first time in 6months today! Despite the fact that it wasn't driving worth a damn I couldn't get the smile off my face.

Jason
 

AlaskaTy

New member
I just saw the post and wasn't too happy with the way the last chunk of numbers came out. There are actually 5 groups of numbers in there.
 

dgoodhue

BuSTeD 4.3
Re: HELP!! Ultimate chip issues

AlaskaTy said:
My ty is finally running ('bout time I graduate in a week) but with the fuel pressure at 50psi and the ultimate set to T1 15 it acted as if it was in valet mode. Throttle response is nill and when it finally musters up some go it is sluggish at every point. The weird part was that it shifted at 3800rpm. I have the 50# chip w/ some 50# injectors by the way. I still haven't figured out if I have the stock chip or if I have a pit bull chip. Is there any external demarcation that is different for stock chips and pitbull chips? I took some numbers off the "stock" chip:

On the external blue piece:
BBZB
1618
1579

On the chip's surface:
1621
3627
these two numbers can be seen through one of the holes in the blue piece

980
1606 9300
BLDP9208 1977

Is the pitbull a piggyback system? Because the chip I have in there isn't piggybacked. The reason I think it may be the pitbull chip is because i have a feeling the previous owner ordered the ATR stage 2 package (when I bought my car it had ATR 3" cat back, ATR aux IC, 160 deg t-stat, a cold air kit, a battery relocate kit)

But on a positive note, I drove my car for the first time in 6months today! Despite the fact that it wasn't driving worth a damn I couldn't get the smile off my face.

Jason

My ATR Pitbull has an ATR number on the side. BBZB is a GM PROM for SYTy's, however someone could have changed it contents with an eraser and chip burner. If your piggy the chip as long as its limp home and ESC circuitry is correct it doesn't matter what the PROM contents are.
 

Daron

Active member
Re: HELP!! Ultimate chip issues

Some of the folks that could help you, dont hang out much here in the lounge, but do frequent the "How to Mod and Repair" area.

I suspect the duty cycle map in the 50 pound ultimate is significantly different than what the stock injectors are needing... Take the ultimate out, till you get the correct injectors, then we can troubleshoot any residual issues.
 

FLSY2730

New member
Re: HELP!! Ultimate chip issues

Daron said:
Some of the folks that could help you, dont hang out much here in the lounge, but do frequent the "How to Mod and Repair" area.


Thats funny, so you are saying you dont check the syty lounge or the people that could help him dont check the syty lounge, I check almost all of the sections everytime i visit the site, I mean why not, there is some interesting things in the lounge, sometimes there is a bunch of crap, but it is all good and fun , so to say that the syty gurus dont check out the lounge ,i would have to disagree, maybe they dont like the lounge but i bet they at least look.
I am not trying to start a flame war but i have seen this before where someone said "you should post it in a different area because it will not be seen by the syty gurus " I think if you come on to syty.net you should check out everything, that is what i do and love to check out every different area.
I think that this site has some of the best car/truck minds out there, which is good for all of us. :D
 

Timbo

SyTy Stalker
Jason, you're coming back to AK later this month, right? Are you bringing the Ty?
 

smeagol

Active member
Ok, first off 50# programs do NOT use 50psi base fuel pressure. They should be ran at 40-43psi base.

Second, check the eprom on the ultimate itself - it should have a handwritten label on it. Check what version you have. If it is version 2, swap to program T1-20 or T1-22, as the version 2 programs are kinda F'd up and we need to get you the latest. If you don't know the layout of the programs for the 50# stuff, see this page: http://www.chitownsyty.com/bg/chipstuff/50v2.htm

Also, we will have a new chip for the display box for 50# chip owners to change the displayed programs to reflect the 50# program layout.

Let me know what version you have before we go batty trying to figure out problems that *may* be calibration based.
 

Daron

Active member
Re: HELP!! Ultimate chip issues

Daron said:
Some of the folks that could help you, dont hang out much here in the lounge, but do frequent the "How to Mod and Repair" area.

I suspect the duty cycle map in the 50 pound ultimate is significantly different than what the stock injectors are needing... Take the ultimate out, till you get the correct injectors, then we can troubleshoot any residual issues.

Hmph... so much for actually reading the original post. Where I got the jist the stock injectors were in use is beyond me...
 

AlaskaTy

New member
i've got 50# injectors so the injector duty cycle should be good to go. I've got the vortec version 1 chip by the way, I don't have vortecs, but i've got some lightly ported L35's. I first started the truck with 45psi for fuel pressure, and it was running the same.

I put the stock chip in to check some codes (does the ultimate allow you to used the aldl like the stock chip?) and it wouldn't just wouldn't stay running (I got a taller cam in my new engine). Could the problem be in the control box?

Timbo: I'm 90% sure I'm coming up to AK this summer, just gotta break in the engine before I tacklel the Alcan.
 

smeagol

Active member
Several things here.
The Vortec cal is different than the L35 cal mainly in the timing area. People are assuming that ported L35's equal Vortecs and this is NOT THE CASE.

The ALDL/messaging etc all works on these chips.

The Vortec version 1 has a few issues; the 50# heads/cam calibrations were recently gone through, and the v1 was found to have problems by Bill Hardifer and Ed Hess. V2 should have fixed all of that.

Regardless, you shouldn't have that calibration, you need the L35 heads/cam stuff.

What are your cam specs?
 

AlaskaTy

New member
I don't have my cam specs off hand, I just got my engine built by Mike Lee and he told me that most trucks wouldn't run with the stock chip and my cam setup. Swapped the stock chip in and it refused to idle. The aldl worked with the stock chip but wouldn't communicate with the ultimate chip. Also the check engine light would flicker constantly, but never come on completely. Should I send back the vortec v.1 and get an L35 v.2? Thanks for all the help guys.

Jason
 

smeagol

Active member
That cam is fine.

You need L35 heads/cam 50# chip v1

Mike should have an eprom for you, and will be faster to get it out than me at this point ;)
 
Top