Help with Moates

Ty 1885

Member
Hi. I am 100% F****T, I bought Moates APU1 with adapter, downloaded bin from code 59 pluged everything in and NOTHING. I cant tell if its working or what to look for!
I thought it would have step by step intructions but NO!!!
The truck bairly runs at all.
I have no idea what thoes names or numbers mean.
I thought that it would have a cell graffs so i can ajust my fuel but NOOOO!
I am sooo pissed, i can spell very good.

can ANYBODY help a fellow SYTY ? :steamer:
 
Last edited:

QWERTYphoon

Motley Driver Award 2009
Re: Wtf!!

Re: Wtf!!

Ouch, I guess I really don't know what to say other than we need more information. Try using spell check. You have a lot of mods. Who has helped you in the past? Who sold you the APU1 and adapter? What laptop program are you using? The truck doesn't run at all or barely? Rename this topic from WTF to "help with tuning" or "Need moates help" something so people will read the post!
 

sytyguy

Moderated User
Re: Wtf!!

Re: Wtf!!

Okay....let's start fresh.

What bin did you use?
Using the correct xdf file?
Is the carrier/chip oriented properly in the ECM?
Are you even using a stock chip in a piggyback configuration?
Are you getting any odd check engine light activity?
Are you emulating or did you just upload the bin to the APU1?

Try uploading the bin to the APU1 completely independent of the truck (like on the kitchen table with just the laptop and AutoProm). Then, take the APU1 and plug it into the carrier. Does it work now?

Snap some pics of your carrier setup and let's see if we can spot something odd.

Hood
 

ashman

------
Re: Wtf!!

Re: Wtf!!

Ty 1885 said:
I thought that it would have a cell graffs so i can ajust my fuel but NOOOO!


that statement alone lets us know that you haven't spent one second trying research or learn.

good luck :roll:
 

TYTILIDIE

METH HEAD
Re: Wtf!!

Re: Wtf!!

ashman said:
that statement alone lets us know that you haven't spent one second trying research or learn.

good luck :roll:

X100. If you dont know anything about your truck then you probably wnat to not start off with by trying to tune. But that would be cool if there was a tuning program/set up that did it all for you I guess, even hook everything up.
 

Loeryder

New member
Re: Wtf!!

Re: Wtf!!

The graphing comes into play in TunerPro RT which is used to edit the bin as well as upload and verify that the emulator is actually running.

You need to do some more research before just plugging stuff in and willing it to work.

The XDF and ADS files are available from code59.org to get TunerPro setup for the table defs and aldl datastream.

Not sure where you go your BIN but I would find someone with a build similar to yours to start from.
The base BINs may be too far from your setup to run acceptably.

Are you getting a check engine light when it does run?
My guess is that your not emulating and the ECM is running in limp home mode.

read read read...
there is lots of info on code 59 and emulating a BIn to your ecm so do some searches and read some more... then when you understand the process and all teh components to the tools, then start asking the questions.
 

MRKING

New Parts for Old Trucks
Re: Wtf!!

Re: Wtf!!

Did you install the correct drivers onto your laptop/pc for your new hardware ? Whatever searching & reading you did to that brought you to the conclusion that you need this stuff covered the install as well .
 

WyoSyclone

Active member
Re: Wtf!!

Re: Wtf!!

Like Hood said, please take a few pics of how you have things hooked up, how your chip is installed, etc. Sounds like the truck is running in limp-home mode. Maybe there is a fellow tuner in the Florida area that could show you some basics... if not, take a deep breath, and be prepared to follow some instructions step-by-step from the members here who will help out.... all will be good in the end :)
 

Ty 1885

Member
Re: Help with Moates

Thanks for fast replys.
I know what i'm doing as far as mechanicals go, however chip tunning is something else.
Before i ordered this stuff, i did alot of looking and learning about tunning, however looking and learning is deffrent than doing, looks easy when someone else is tunning.
I realized that i'm over my head here, so i'm returning everything , and keeping my Ultimate setup.
I've been playing cars and trucks for over 25 years with great results. I know that I'm not good with body work and now i know that i'm also not good with chip tunning, leave to the pros. Thanks for your help.
 

JSM

Active member
Re: Help with Moates

Goodluck, sounds like you didn't even give it a chance to work or learn and just got flusterated right away and gave up.

Tuning does require some dedication on the owners part, it isn't like a cold air kit, where a few screws turned and your done.
 

sytyguy

Moderated User
Re: Help with Moates

Ty 1885, if you attend the Shindig (link) in November, there will be several of us that are well-versed in tuning. I'm sure you could answer most/all of your questions then. Like Jeff said, it's (tuning) something that takes some dedication and perseverance, but if you stick with it, it can be the most rewarding thing you do to your truck.
 

Ty 1885

Member
Re: Help with Moates

You guys are GREAT, I really love this place. I'll try to make it to the event. Thanks...
 

WyoSyclone

Active member
Re: Help with Moates

Sounds like a nice build on your Sy, 1885... how does it run with the chip you have now?
 
Top