JSM
Active member
After several years of using the stock GM ECM to control my truck I have decided to swap out to an aftermarket.
Couple reasons:
I had 4 computers running various things (trans, ecm, boost, wideband gauge).
At the track I would have to swap betwen up to 4 systems to make adjustments, log information,etc. Add in the wiring mess that was involved.
Now I will also say that I still strongly suggest code59 for 90% of the owners here. Let alone from a budget standpoint, but it is very capable also. Heck it ran a v8 with twin turbos something it was never designed to do from GM.
Our stock ECM was designed o, say mid 80's. A few things have changed since then so wanted to see what aftermarket had to offer.
After talking with Alex mainly, and his contacts at Steve Morris engines I went ahead and bought a Holley Dominator system. It does both the engine and transmission, as well as boost (at some point soon). It will control the wideband sensor (actually 2 if you want) without the need for PLX box. So basically I removed 4 computers, and now have 1.
The complete engine wiring harness is new also. This is no small task, and its a good thing my truck will never be stock again.
This past weekend I was able to fire it up for the first time. One of the neat features of the Holley system is the wideband and autotuning. I was skeptical but I have been converted. It works and works well at least so far. (have not driven truck yet).
Right now I am into the system about $2300. Its not a cheap thing. I did sell my old trans controller, ostrich, etc to help some.
Tonight if the rain stays away I plan for the first street drive and will report back with that, as well as hopefully some track testing. I do have autocross/road course planned in week and a half so we will see some there.
More to come.......
Couple reasons:
I had 4 computers running various things (trans, ecm, boost, wideband gauge).
At the track I would have to swap betwen up to 4 systems to make adjustments, log information,etc. Add in the wiring mess that was involved.
Now I will also say that I still strongly suggest code59 for 90% of the owners here. Let alone from a budget standpoint, but it is very capable also. Heck it ran a v8 with twin turbos something it was never designed to do from GM.
Our stock ECM was designed o, say mid 80's. A few things have changed since then so wanted to see what aftermarket had to offer.
After talking with Alex mainly, and his contacts at Steve Morris engines I went ahead and bought a Holley Dominator system. It does both the engine and transmission, as well as boost (at some point soon). It will control the wideband sensor (actually 2 if you want) without the need for PLX box. So basically I removed 4 computers, and now have 1.
The complete engine wiring harness is new also. This is no small task, and its a good thing my truck will never be stock again.
This past weekend I was able to fire it up for the first time. One of the neat features of the Holley system is the wideband and autotuning. I was skeptical but I have been converted. It works and works well at least so far. (have not driven truck yet).
Right now I am into the system about $2300. Its not a cheap thing. I did sell my old trans controller, ostrich, etc to help some.
Tonight if the rain stays away I plan for the first street drive and will report back with that, as well as hopefully some track testing. I do have autocross/road course planned in week and a half so we will see some there.
More to come.......
Last edited: