hooking PCV back up, need your advice

cvcsmkr

Donating Member
i will be hooking the stock pcv system on the passenger valve cover exactly as stock.
but i have a breather in the oil fill, and a 5/8 metal 90* pipe thats inserted behind the oil fill into a grommet in drivers valve cover.
i really dont want to run a 5/8 hose to intake. do i need it?
and i have tried to pull it out but it is in there pretty good, is it made to pull out or is it permanet?
should i plug oil fill or leave breather on?
thanks in advance
 

SyTyJedi

Jedi Council
Re: hooking PCV back up, need your advice

It wll pull out, just do some steroids. I would lose the breather on the oil fill and get the K&N push in breather for the driver's side. You can order it from Jegs or Summit, the part # is floating around here somewhere. I can look to see if I have a used one for sale for you too. I'll check tonight.

I've had breathers in both locations, I prefer the push in breather for cleanliness. No hose running to intake, and no excessive oil on the valvecover.
 
Top