Hooking up the PLX M300...

Throws

Active member
OK... I bought a M300 off of Hood, and I've finally got everything I need to get this done now.

However... I have 4 wires: red,black,white,grey.

My thoughts on this are: hook up +12v to fuse panel. hook up black ground to B9. Hook up white to E14 for WB input (have TurboTweak chip already), connect to B9 with cap. Take grey NB wire and connect to F14, use cap to connect to B9.

Sound right? Anything I'm missing?

-P
 

Throws

Active member
Ok... Yes, but is B9 a good ground if there's not a separate ground for the power +12v?

-P

Sent from my mwp6985 using Board Express
 

sytyguy

Moderated User
Re: Hooking up the PLX M300...

B9 or external ground have both proven reliable for me. Even when using B9 to ground the unit, I prefer to tap a body ground onto that wire too. Can never have too many good grounds.

PLX-SYTY_001.jpg
 
Top