how hard is it?

Slowcone

New member
how hard is code 59 to use? i have never done any tuning before and am looking to get a new bin for my sy since i finished the turbo upgrade. i also plan to add alky injection down the line.

so bottom line is how hard is it? does the autotune feature really work that good? i was planning on having a syty tuner tune over the internet via datamaster but i still need all the equipment to upload my own bins. plus the want a considerable amout of money to do it but they will tune until i am happy.
 

WyoSyclone

Active member
Re: how hard is it?

Code59 is really pretty easy to use, and getting easier all the time. Visit the site and read some of the good startup articles that are posted... it can seem really scary at first but once you do a few days of tuning it becomes a lot of fun. One word of warning..... you have to have PATIENCE! There is a certain progression to tuning and you have to follow the steps, log a run, look at the results, and then go back and work on ONE thing at a time. There are getting to be some good starter BINS posted on the site. If you really want to understand what makes your truck run, and why, '59 is the only way to go.

Autotune will help for about the first 5 or 10 logs/runs... then you're better off really studying the data and fine-tuning at your own pace.

Hope this helps :D
..Rob
 

epix

Typhoon
Re: how hard is it?

If you know how to run a datalogging program and copy and paste using a computer; that's pretty much all you need to use Autotune
 

Slowcone

New member
Re: how hard is it?

lol yea i can copy and paste but will autotune take care of everything? i dunno i just dont want to hurt anything.
 

WyoSyclone

Active member
Re: how hard is it?

lol yea i can copy and paste but will autotune take care of everything? i dunno i just dont want to hurt anything.

Nope.... nothing will take care of everything, except a lot of patience, datalogging, and studying/reading posts on what to do, or not to do! There's no such thing as an 'automatic' tuning program :D
....someone would be rather well-off if they could build such a program, however!

My advice would be to go to the Code59 site and read the 'Beginner Guide to Code59 Tables to get you started' sticky that Paul wrote.
 

JSM

Active member
Re: how hard is it?

Tuning is very confusing when you get started, the first several times you look at it, etc.

What will happen is over time the pieces of the puzzle start to come toghether and you see the "picture". Now I can't tell you how many pieces of the puzzle exist, I doubt ANYBODY knows how many piece puzzle it is, but that is part of the fun also when you figure out 1 thing you discover another piece. It is an ongoing process but can be very rewarding.

Take things slow, read the forum, download and look over the files posted, reread things again. Things will begin to click. The first time you read it feel like your reading another language. I was there as was everybody else.

When you get to actually tuning, just play around with the idle at first and see what you can do. You won't hurt anything, and can always go back to what you had before.

I see a lot of guys switch to an aftermarket system also. Nothing will avoid tuning, aftermarket systems are almost identical as far as how to tune also. What you learn in 1 system can be used in another with very little changes.
 

Slowcone

New member
Re: how hard is it?

just ordered my ostrich and g1 adapter. i downloaded a bine and started playing around in tunerpro to get a feel how stuff works. i tried to log some data just to see how it worked compared to datamaster and i could not initiate com port....tried a whole bunch of stuff including device manager and all.
 
Top