how long with it hold up

sy#2921

BAMF
Alright i am trying to decide if i want to go ahead and do heads and cam on my 70k stock motor or just wait to build a whole other motor. Right now the truck is running some 60 series turbo with a 4" inlet not sure about any of the specs, dequick a2a, meth injection full 3" exhaust. along with a few other minor items. Best was 12.3 on a very basic and extremely safe tune.

Now i have a set of very well ported and polished vortech's with slightly bigger valves and beehive springs good to .600 lift they were done by an extremely well known person but not known for sy/ty's more for ls series stuff. They were good for a full second savings on a 01 s10 with just a procharger at 10psi.
Next i have a 280ahr cam lined up for a good price that i was planning on running

Now with these two mods ontop of what i have and a good tune how long would the motor be able to stand the increased power. If it isnt long i would much rather wait then pop something. any of the big boys here got any ideas??
 

sy#2921

BAMF
Re: how long with it hold up

i figured as much but with parts in hand i am tempted to just put them on now. I am looking for reasons for once to actually not mod the truck
 

#2875

built, not bought
Re: how long with it hold up

i say put them on. when you throw a rod(s) hopefully all you will need is a couple valves and a valve job... but if your pistons break you may roach your turbo.
 

12secondSY

Syty Killer :(
Re: how long with it hold up

I have less than that and my engine went, but I did have 127K. I would build the bottom end first.
 

Don W.

Stab it and steer it
Re: how long with it hold up

I would agree. I have NEVER seen a new top end work on an old bottom end like this. Just my added :2cents: . I'd wait and build it right but it's not my $$ or time so what the heck.:squint:
 

sy#2921

BAMF
Re: how long with it hold up

yeah i think i will wait just tune the heck out of the current setup then when i have the money throw rods and pistons with those heads and cam on the a spare motor

Just needed people to talk me out of it since its sooo easy to just want to throw the heads and cam on since they are sitting here
 

12secondSY

Syty Killer :(
Re: how long with it hold up

Sell the heads to me then you dont have to worry about it. I'll trade you a shiny new penny for them.
 
Top