How to tell Vortec engine (true vortec)

George Blake

DONATING MEMBER
I was picking up transmission cores and found a 4.3 liter "vortec" engine laying on the ground. Crank is bent but I mainly wanted the heads and accessories. It had the aluminum oil pan. Is this an indicator of the true "vortec" setup? Or should I take a valvecover off and verify numbers down in the heads. I just don't think the yard will let me tear into the engine unless I'm gonna buy it. Just FYI, I'm talking about the true "vortec" heads that everyone is welding their stock intake up to fit on, NOT the L-35 heads.
 

leroy

Donating Member
Re: How to tell Vortec engine (true vortec)

I think the distributor cap will look a lot different, if it's still on. The electrical connection to the distributor will also be different. I think there should also be a crank sensor around the front cover somewhere. It's been awhile since I took one apart, so feel free to correct me .

Jim
 

jwaller

Evil Genius/SyTy Guru
Re: How to tell Vortec engine (true vortec)

if it's got the alum oil pan then ya it's 99% true vortec. count the bolts that hold the intake to the heads. should be 4 on each head insted of 6 like we have originally.
 
Top