Bill Z
Donating Member
Got a 92 Typhoon. Not the first, second or third owner. Most of the time the truck runs great. However at times (like now) the truck dies after sitting longer than 60seconds at a light. While going down the road, it bucks at any speed after you have been running at that speed for a while.
Sometime when coming to a rapid stop at a stop sign, then trying to accelerate from the sign quickly (California stop) the truck bogs down and falls on its face. If you letup on the gas and let it get composed, it runs through the gears like a scalded ape.
The last time I fixed the problem was after replacing plugs and wires. 9 months ago I went to the NKG Iridium plugs. I checked the gap on these today and they appear to be holding the gap. The copper AC plugs would widen the gap from .034 to .045 in just 3 months. Also, I did find one Mallory wire burnt a little by the down pipe. I moved it out of the way with a tie wrap.
The only tuning tool I have is TurboLink 4. I have some recorded runs but I just can see what causes what.
The scans do show where the idle (in park) falls to 200 RPMs and then the truck recovers. I think that if the truck is in gear at one of these moments, it would die.
I have replaced the IAC and the O2 along with checking the TPS. Nothing seems to help.
While checking my vacuum lines, I noticed that one of the check valves was not working. Blowing or sucking, the air just went through. I did replace it but no improvement in the basic problem.
I can email anyone the files I saved.
Please help.
Sometime when coming to a rapid stop at a stop sign, then trying to accelerate from the sign quickly (California stop) the truck bogs down and falls on its face. If you letup on the gas and let it get composed, it runs through the gears like a scalded ape.
The last time I fixed the problem was after replacing plugs and wires. 9 months ago I went to the NKG Iridium plugs. I checked the gap on these today and they appear to be holding the gap. The copper AC plugs would widen the gap from .034 to .045 in just 3 months. Also, I did find one Mallory wire burnt a little by the down pipe. I moved it out of the way with a tie wrap.
The only tuning tool I have is TurboLink 4. I have some recorded runs but I just can see what causes what.
The scans do show where the idle (in park) falls to 200 RPMs and then the truck recovers. I think that if the truck is in gear at one of these moments, it would die.
I have replaced the IAC and the O2 along with checking the TPS. Nothing seems to help.
While checking my vacuum lines, I noticed that one of the check valves was not working. Blowing or sucking, the air just went through. I did replace it but no improvement in the basic problem.
I can email anyone the files I saved.
Please help.