Injector Recommendation

TYHOGG

TYHOGG

Active member
I have been looking at injectors for the past 2 weeks i really can't figure out which i should buy. My build consist of: forged internals, fully ports vortec's (over sized valves), 422 cam, pte63. I was looking at 50's to keep the duty cycle in the +80% area. i see rpm also offers 60's, and racetronix offers 55's and 79's. My goal is 10's with alkycontrol kit, and lots of tuning with the motes. Any recommendations?

Thanks in advance guys,
-Adam
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: Injector Recommendation

For solid 10s i would suggest the 75# high's or 75# low with ecu mods. Good for 600hp @ 80% duty cycle. With alky you will get a small cushion. There are a few people running these injectors with factory computers that may be willing to help you get dialed in.

FWIW, We've been working with Nolan on some tunes for the high imp 60s and drive ability is outstanding. As good if not better then stock (vortecs with mild 500 lift cam and 220 duration.)
 
You must log in or register to reply here.
Top