injectors injectors injectors

Status
Not open for further replies.

Captain Morgan

Moderated User
ok, well im finally going to be upgrading my turbo. im in no rush to bolt everything on, so im just gathering things piece by piece.

The truck will be running bascially the following combo:

PTE-52
ATR Chip
3" DP (most likely with int. WG)
Boost Controller (undecided)
PTE Cat
Stock IC (for now)

and last but not least, some sort of injectors. Now immediately, everyone says "got 50#'s, but thats just not gonna fly with me, at least not w/o some reasoning.

I dont need to get the truck to 11's or anything, and I drive it on the street 99% of the time, 1% at the track. I also dont want my MPG to into the toilet either, so what Im asking is, what would be a good injector to go with this setup that wont starve it for fuel. I have a line to get some 42.5# for $200, so I wanna know if I should go for them or not.

thanks in advance, any help would be appreciated.
 

Falco

Donating Member
I guess you aware of you need to modify your ATR chip to be able to run different injectors. Does ATR offer a chip for the 42.5's? If not, I'd say go with the ultimate and 50's. Even if they offer something, it's still a 2 bar chip.

An other option could be to buy custom chips from someone, Dig, Nolan etc...

Later,
 

ed hess

race or get outta the way
morgan
i have some new unused 42.5 injectors you can have for 100 bucks
came with my motor. also some used bluetops, that i havent checked the size on yet.

ed
 

Captain Morgan

Moderated User
Ed thanks for the offer, but it just seems like going fast is just too much of a damn hassle. oh well, i tried, might as well give up on this like everything else.

if I do end up doing anything, i need to make sure 42.5's are enough, so ill get back to you if the time ever comes.
 

myclone

Donating Member
You dont need bigger injectors IMO if you only go to the track once a year or so. Stockers will go high 11s with 116 octane and 25psi I promise ya (although they wont like it).

I dunno how they will do with the 52 as I dont have one and Erue went to 50 lbers before he had a chance to play with it a lot with the stockers.
 

Tooky

Serious about performance
I dont know where you are getting the idea that 50# injectors is going to make your MPG go to crap. Just because it's a bigger injector doesnt mean it injects more fuel for cruise conditions.

You need a chip that's gonna plug & play and have good chance of working properly. The 50# injectors and 50# Ultimate seems to be your only option unless you wanna stay stock.

I tested a truck last week with a PT-54 and stock injectors and when we surpassed 18 PSI at WOT the O2 mV went from 900s to the 100s and stayed there. The truck felt about mid 12s. I've never seen O2s stay at 100mv levels but that seems like it's outta injector to me. Knock retard stayed exceptionally low though (0.0* most of the time.)

The choice seems easy. Build your truck and run it with your stock injectors and stock ultimate. Then if it works; great. If it isn't enough, pay the paltry $30 to upgrade your Ultimate to the 50# version and install the 50# injectors. You don't lose anything that way.
 

Captain Morgan

Moderated User
TookyCat said:
I dont know where you are getting the idea that 50# injectors is going to make your MPG go to crap. Just because it's a bigger injector doesnt mean it injects more fuel for cruise conditions.

You need a chip that's gonna plug & play and have good chance of working properly. The 50# injectors and 50# Ultimate seems to be your only option unless you wanna stay stock.

I tested a truck last week with a PT-54 and stock injectors and when we surpassed 18 PSI at WOT the O2 mV went from 900s to the 100s and stayed there. The truck felt about mid 12s. I've never seen O2s stay at 100mv levels but that seems like it's outta injector to me. Knock retard stayed exceptionally low though (0.0* most of the time.)

The choice seems easy. Build your truck and run it with your stock injectors and stock ultimate. Then if it works; great. If it isn't enough, pay the paltry $30 to upgrade your Ultimate to the 50# version and install the 50# injectors. You don't lose anything that way.

yeah, exactly, which is pretty much why i guess im gonna have to stay stock, cause an Ultimate is out of the fuckin question......thanks anyway.
 

Tooky

Serious about performance
NJTy180 said:
yeah, exactly, which is pretty much why i guess im gonna have to stay stock, cause an Ultimate is out of the fuckin question......thanks anyway.
Alright I'm gonna say something I know I'll regret.

You dont have what it takes to run a SyTy and you'd be much happier with something else like a LS1 Corvette or a Mustang or Lightning. It takes things like determination, persistence, and patience. Your intensity is for shit. How many times have you posted on here bitching about how things don't work right on your truck? I hate reading your posts because your attitude is the worst. That's the real problem. You're only fooling yourself if you think you throw a part on these trucks and they might go fast and if you have to spend 1 week tuning it to run right it's just "way too much".

A PT-52 and chip is "staying stock"? Huh. Regardless, I wouldn't even recommend staying stock. Sell your vehicle. If you stay stock you're still going to have to change ignition frequently and solve knock retard, etc. I'm sure that's all also "out of the fuckin question". I'm not trying to offend you (although I'm sure I have), some people would just enjoy themselves more in a different vehicle and that suits me fine.

Either way, stop soliciting advice when it seems apparent you will never be interested in putting in the necessary work to make your truck run right.
 

Captain Morgan

Moderated User
TookyCat said:
Alright I'm gonna say something I know I'll regret.

You dont have what it takes to run a SyTy and you'd be much happier with something else like a LS1 Corvette or a Mustang or Lightning. It takes things like determination, persistence, and patience. Your intensity is for shit. How many times have you posted on here bitching about how things don't work right on your truck? I hate reading your posts because your attitude is the worst. That's the real problem. You're only fooling yourself if you think you throw a part on these trucks and they might go fast and if you have to spend 1 week tuning it to run right it's just "way too much".

tooky, shut the fuck up. nobody wants to hear your overview of me or my attitude, so do us all a favor and keep your opinions to your damn self before you make me do something ILL REGRET if I ever bump into you again.

Like anyone enjoys reading your fuckin posts? LMAO spare me the humor, how many times have YOU been flammed for sticking your noise where it doesnt belong? about 2500 times or so i would guess?

Oh yeah, and im the ONLY one who comes on here to blow off steam too, get real you little prick.

A PT-52 and chip is "staying stock"? Huh.
yeah, about as stock as L35 heads eh??
no you stupid shit, keeping the Mitsu and stock chip and stock injectors IS STOCK! Im not gonna put the 52 on if its not going to work properly, moron. :roll:

Regardless, I wouldn't even recommend staying stock.
Nobody gives a FUCK what you recommend

Sell your vehicle.

hey, why dont you sell your girlfriend? im sure someone will pick her up, real cheap.

If you stay stock you're still going to have to change ignition frequently and solve knock retard, etc. I'm sure that's all also "out of the fuckin question". I'm not trying to offend you (although I'm sure I have), some people would just enjoy themselves more in a different vehicle and that suits me fine.

blah blah blah blah, STFU ALREADY!

Either way, stop soliciting advice when it seems apparent you will never be interested in putting in the necessary work to make your truck run right.

yeah, i guess as apparent as the fact that your NEVER going to stop being a royal pain in the ass to the entire world.

do me a favor pussy, i mean tooky, NEVER, and I mean NEVER respond to one of my posts, and if your cry baby ass doesnt like reading my shit, its real simple dude, DONT CLICK THE FUCKIN LINK!

have a wonderful evening and many more to come.
c'ya
 
Status
Not open for further replies.
Top