Int. hose routing

desmo1098s

desmo1098s

New member
So, dumb mistake. I am putting back together my "new" intercooler pump/hose(s) and forgot to label the inlet/outlet.

My question is this - Which port is the outlet/inlet on the pump and intercooler. I will wait for a reply before I proceed. Thanks in advance!
 
Loeryder

Loeryder

New member
Re: Int. hose routing

The lower port on the upper IC should feed the inlet on the pump.
That way gravity will always make sure you have fluid at the feed side of the pump.

Outlet of the pump feeds to the lower connection on the lower CCHE that way it "burps" the air automatically as it fills the CCHE.

As far as which port on the pump is inlet outlet it should be marked.
If not just look at it as if it were a turbo.

The center section that feeds straight into the pump is the inlet and the housing sticking out at a 90* angle to the pump body is the outlet.
 
You must log in or register to reply here.
Top