Is this a PTE52

[canadian]

Ok, going through all my old parts that I've bought over the years and trying to figure out the exact details of this turbo. I bought it from someone on here, but can't remember who. I believe that this is a PTE52 for a Grand National. I didn't take pictures of the back side of the exhaust housing but it has "PRECISION" cast into it so I'm certain it's one of theirs.

On the turbo outlet, someone engraved 52 into it, so that's why I'm thinking it's a 52. It has a 3 bolt exhaust housing with a 4 to 3 bolt adapter.

Any ideas?

 

[warmpancakes]

Re: Is this a PTE52

thats how my 44 is marked

 

[canadian]

Re: Is this a PTE52

So how can one tell if it's a 44/52/54, etc? Measurements of the inlet and exhaust? Inlet measures 2.75" and the exhaust side is 2.5"

 

[QuinnSY]

Re: Is this a PTE52

I would like to know how to tell also since it appears I have the same casing

 

[warmpancakes]

Re: Is this a PTE52

pte engraves the number on the outlet

 

[ziembic]

Re: Is this a PTE52

pte engraves the number on the outlet

thats how my 44 is marked

Then why did you say that your 44 is marked the same as his 52. Wouldn't yours be marked 44, and his be marked 52?

 

[warmpancakes]

Re: Is this a PTE52

that how my 44 is marked IE the same way

 

[dgoodhue]

Re: Is this a PTE52

Its a 52.

Kens PTE 44, would be engraved with a 44 (or 4431). The marking are for T04E Compressor housing and .63 a/r exhaust housing. 52 is PTE notation for which compressor and exhaust wheels installed.

 

[canadian]

Re: Is this a PTE52

that how my 44 is marked IE the same way

Oh, I thought you meant your 44 was marked with 52 on it since I think sometimes different turbos share some of the same parts. Thanks for clearing that up.

Now, does anybody know if PTE is still selling the SyTy exhaust housings? I've read different reports that they do/don't.

I think this one might go back for a rebuild, upgrade on the exhaust housing. I know I will need either a PTE or ATR downpipe to make it work.

 

[Aeroking]

Re: Is this a PTE52

Now, does anybody know if PTE is still selling the SyTy exhaust housings? I've read different reports that they do/don't.

On Precison's remodeled website they list the Syty housing as an option. and i spoke with NoLimit about a month ago, and they still have them.

 

[QuinnSY]

Re: Is this a PTE52

I found this on the intake outlet, but mine didn't have the hand sketched # like yours did I have a ".50" stamped on mine