Is WBO2 sensor pre-heated - need a quick answer

mrweelr

New member
I hooked the PLX-R500 WBO2 up this weekend, splicing it into the ECM wiring, etc.. I was testing some electrical things with the ignition in the ON position and noticed smoke coming off the WB02 sensor itself - it is not yet screwed into the downpipe. It's extremely hot, I'm not sure if this is normal or not, can someone confirm. Otherwise, I must have screwed the wiring up and who knows what else.

Anyone???
 

scotts4

ADDICTED
Re: Is WBO2 sensor pre-heated - need a quick answer

i dont know about the smoke but it is preheated they use that to get the sensor up to oparating temp faster
 

mrweelr

New member
Re: Is WBO2 sensor pre-heated - need a quick answer

OK, I read this link and it says O2 sensors are preheated up to 600F or so:

http://home.flash.net/~lorint/lorin/fuel/lambda.htm

If this is true, then the heat coming from this Bosch LSU 4.2 WBO2 sensor must be normal. After turning the key off, the sensor cooled off completely. I was just concerned about the smoke pouring off the sensor, but it was just some of the anti-seize on the threads burning off. If anyone thinks this isn't normal, please let me know.

Thanks
 

mrweelr

New member
Re: Is WBO2 sensor pre-heated - need a quick answer

Thanks Scott, one less thing to worry about ;-)
 
Top