warmpancakes
New member
they are marked 510d on the underside? any ideas?
JE pistons need help IDing them
- Thread starter warmpancakes
- Start date
Lynn D. Brown
New member
J&E Pistons
J&E Pistons
wp,
Did U get the J & E SLP's or the Extreme Duty ones ?
J&E Pistons
wp,
Did U get the J & E SLP's or the Extreme Duty ones ?
warmpancakes
New member
dont know they came with motor.
warmpancakes
New member
if we go by the rules of the ricer yours must be better because the F stands for fast. Ken
warmpancakes
New member
so did I my have a order number, they were custom built pieces, god help me I dont break one.
Lynn D. Brown
New member
J&E pistons
J&E pistons
ed,
"Casting number" ? Just an expression, I guess - they are forgings, aren't they ?
I have one or 2 xtra J&E Extreme Duty pistons, so I will see if I can get some numbers 4 U.
J&E pistons
ed,
"Casting number" ? Just an expression, I guess - they are forgings, aren't they ?
I have one or 2 xtra J&E Extreme Duty pistons, so I will see if I can get some numbers 4 U.
ed hess
race or get outta the way
yep wrong words there.
Reason i would like to see is i think i should do whatever is necessary here to be sure these pistons didnt raise the compression ratio.
the way things have gone so far I wouldnt be surprised by anything.
The piston i have dont look anything like what i see im the new je catalog.
The machine shop i just dropped things off at is going to find out to be sure. Otherwise i may have to buy new ones to be safe. Or ship one back to JE to find out.
Just wondering how much J&E Extreme duty pistons cost each. At least i think that is the correct one for out application. (looking at page 7 of their 2002 catalog)
ed
Reason i would like to see is i think i should do whatever is necessary here to be sure these pistons didnt raise the compression ratio.
the way things have gone so far I wouldnt be surprised by anything.
The piston i have dont look anything like what i see im the new je catalog.
The machine shop i just dropped things off at is going to find out to be sure. Otherwise i may have to buy new ones to be safe. Or ship one back to JE to find out.
Just wondering how much J&E Extreme duty pistons cost each. At least i think that is the correct one for out application. (looking at page 7 of their 2002 catalog)
ed
Lynn D. Brown
New member
J & E's
J & E's
ed,
I have J&E's # in CA. I just talked to them yesterday - it is 714-898-9763.
Supposedly my CR will be 8.5/1 as opposed to 8.33 stock - NBD. The Tech guy @ J&E said that the SRP'S, which is their high volume production piston, has about 5-8 % Silicon in it, so it will be more brittle than the Extreme Duty's, which don't have Si.
I guess the ED's R pretty much their top of the line piston. U can get a price from Summit - I understand the one we want is 131-635 for the .020" oversize piston.
J & E's
ed,
I have J&E's # in CA. I just talked to them yesterday - it is 714-898-9763.
Supposedly my CR will be 8.5/1 as opposed to 8.33 stock - NBD. The Tech guy @ J&E said that the SRP'S, which is their high volume production piston, has about 5-8 % Silicon in it, so it will be more brittle than the Extreme Duty's, which don't have Si.
I guess the ED's R pretty much their top of the line piston. U can get a price from Summit - I understand the one we want is 131-635 for the .020" oversize piston.
ghettosled
SYTY SUPERSTORE
we run the 131636's in the high boost stock block .030 motors. Most of the bowtie block pistons are custom, b/c the next size up is a 4.155. We have also been running the spherical dish piston with good luck.
FYI, I will match or beat any price on JE/SRP pistons.
FYI, I will match or beat any price on JE/SRP pistons.