Just bought the Phil long Chip

akwilks

Mr. Keith
:D Is the chip plug and play? I have a 3bar sensor. I understand there are different setting for the chip. What are they and what do they do? Just anxious...I figure all that info will come with the chip...I had a 3bar chip in earlier but I kept having problems where the cel would flash and then no power, almost as it I was getting no timing advance....today I had to drive pretty far at 15-20 mph because thats all the advance I could get....with this condition, I was getting no codes so now I wait for the chip and hope for better results.. :D
 

live1053rulz

Nor Cal SyTy
Re: Just bought the Phil long Chip

should just be able to plug it in. did you get the 50# chip or the one for stock injectors? for mine, the numbers are low timing and the letters are high. id stay on low. higher numbers = more fuel. kinda have to play with it, and it depends on your mods.
 

gjp

another post whore
Re: Just bought the Phil long Chip

I am running the 6 program with good luck so far.
 

Turbo6

10.20@131.8
Re: Just bought the Phil long Chip

akwilks said:
:D Is the chip plug and play? I have a 3bar sensor. I understand there are different setting for the chip. What are they and what do they do? Just anxious...I figure all that info will come with the chip...I had a 3bar chip in earlier but I kept having problems where the cel would flash and then no power, almost as it I was getting no timing advance....today I had to drive pretty far at 15-20 mph because thats all the advance I could get....with this condition, I was getting no codes so now I wait for the chip and hope for better results.. :D

Give me your e-mail and I'll send you a sheet with the different fuel settings.
 

bjk_typhoon

1993 Typhoon
Re: Just bought the Phil long Chip

Phil, I'm beign a thread stealer here, but a quick question. I recieved the 50#er chip from you yesterday. Sould I run with or without an egr valve?
-Brian Kolonia
 

gjp

another post whore
Re: Just bought the Phil long Chip

You can leave the egr in or remove it and blank it off. The chip does not use the egr. I have to leave my in for california smog.
 

juicehead9

93 Typhoon # 0973
Re: Just bought the Phil long Chip

Phil I was wrong on the chip that I asked for data on. I asked (93Typhoon502) about the ty he know Steve that I got it from. He responded. The chip I have says V4 on the paper with the settings. I need to know how to work this thing please. juicehead9@yahoo.com

He got the chip from E-Rue @ turbotime.us. Phil Long and Eric burned the chip, you might call Eric and see what all settings are for. Tell him you bought the Ty from Steve in East TN that is friends with Kevin Bare, he will know then
 

TYGUY

New member
Re: Just bought the Phil long Chip

i have not installed mine yet..... but i did get it from E-rue few months ago. will the chart be correct for my application?
 

Turbo6

10.20@131.8
Re: Just bought the Phil long Chip

juicehead9 said:
Phil I was wrong on the chip that I asked for data on. I asked (93Typhoon502) about the ty he know Steve that I got it from. He responded. The chip I have says V4 on the paper with the settings. I need to know how to work this thing please. juicehead9@yahoo.com

He got the chip from E-Rue @ turbotime.us. Phil Long and Eric burned the chip, you might call Eric and see what all settings are for. Tell him you bought the Ty from Steve in East TN that is friends with Kevin Bare, he will know then

If I were you I would upgrade to the V5. Send it to me and I will reburn it and send you a sheet. It is $25 to reburn or $35 if you just want me to burn one and send it to you and you keep both. You will get a little better fuel mileage with the V5.
 

Turbo6

10.20@131.8
Re: Just bought the Phil long Chip

TYGUY said:
i have not installed mine yet..... but i did get it from E-rue few months ago. will the chart be correct for my application?

What does the sticker say on the chip?
 
Top