Just got Datamaster Quick ?

White97SVT

Member
Ok so i just got my datamaster and i am getting ready to set it up. I am sure this means i am going to have a few questions. don't worry i will use the search functions. I was wondering is someone could answer a few ?'s first.

The Typhoon is OBD1 right, cause I can't get the cable to click in all the way. it starts to slide one and then gets stopped. I don't want to force the thing on there and bust the OBD port.

The white adaptor the is supposed to go into the serial port wont just fit right in to the one in the back of the computer because they both have the little things hitting each other. So the it wont slide into the back of the comp. Can i just hook the cable directly to the comp or is that not a good idea.

Thanks for any help you guys can give me

Lee
 

GM TURBO

Sell Out
Did you get the right cable?

Ty = OBDI

Com port = Male on the computer end

Cable = Female on the cable end

On the ALDL side - you might have to turn the cable over - or stick it in straight :)
 

92Ty#1524

New member
I've only had DM for a week or so and was equally confused by the connection to the ALDL port. I had it right but the connection felt rather loose so I had doubts initially. And like you, I felt no noticeable "snap" when I made the connection. Just make sure the slot on the OBD1 is facing upwards. No need to force it. If its not in right, it simply wont connect (assuming everything on the laptop end is setup correct).

Just a nickle's worth from a DM noob :wink:
 

White97SVT

Member
92Ty#1524 So I guess then it is the right cable...cause mine seems loose too. Did you get the whole package from TTS also. If so how did you get the other adaptor to hook up with the serial port, and then ALDL cable.
Mine looks like this.
Aldl.jpg

ALDL_pins.jpg

now how the hell is this adaptor supposed to go
ALDL_bothendtouch.jpg

ALDL_Adpt.jpg

any help at all would be greatly appreciated
 

92Ty#1524

New member
You will need a serial cable (DOUBLE FEMALE) to connect the adapter (thats the white box youre trying to plug into your laptop) to the serial port on the laptop. You can probably use a double female serial adapter to plug the little box to the laptop but a cable would give you better range of motion. For example, you would actually be able to set the laptop on a chair outside the vehicle while you're tweaking under the hood and see it as opposed to having to leave it on the seat of the vehicle due to the length of the black OBD1 cable that came with it.
 

White97SVT

Member
After looking at the adaptor again, I think i will need a male female cable. Cause the adaptor needs to take pins and the part going to the laptop needs to take pins...
 

92Ty#1524

New member
You're totally right. Took a second look at mine. I'm using a gender adapter to connect the double female to the box. Radio Shack had a limited selection of serial cables as I recall.
 
Top