Just pulled ecm

blackty

Active member
To see if there was an aftermarket chip. No (BBZA). Two questions: Was it popular to send out stock chip for reconfiguration? I ask because the sealing sticker was cut. Could someone, Dig, Hood ...check my current chip to see if it was re-burned? Second, there is a single white wire with a factory connector hanging down with the ecm. It is not for the courtesy light, both wires are there. It doesn't look like it goes to the ecm. Any ideas? Thanks guys...Jim
 

sytyguy

Moderated User
Re: Just pulled ecm

To see if there was an aftermarket chip. No (BBZA). Two questions: Was it popular to send out stock chip for reconfiguration? I ask because the sealing sticker was cut. Could someone, Dig, Hood ...check my current chip to see if it was re-burned? Second, there is a single white wire with a factory connector hanging down with the ecm. It is not for the courtesy light, both wires are there. It doesn't look like it goes to the ecm. Any ideas? Thanks guys...Jim
Sure...I can check the binary data to see if it's stock or modified. Is there a silver sticker/decal/label over the eprom (look through the holes in the memcal cover to see)? Most people don't have access to the GM label, so if it's still in place (and hasn't been just stuck back on), it's most likely original. Send it on to me though if you want.....better yet, snap a pic and we'll check it out.
 

blackty

Active member
Re: Just pulled ecm

Sorry Mike, had technical difficulties with email. Support says it should be fixed. Sent pictures your way. Thanks...Jim
 

sytyguy

Moderated User
Re: Just pulled ecm

Just looked......blurry pics, but the label appears to be there. What are the numbers/words on the label?
 

blackty

Active member
Re: Just pulled ecm

Sorry for the crappy pics.
DELCO
BBZA
1576
The second window has1141196
Thanks...Jim
 

sytyguy

Moderated User
Re: Just pulled ecm

Looking at the label and how it's adhered.....it's stock. I won't know for sure until binary verification, but I'm 99.9% sure that chip is untouched.
 

pinellas50

New Guy
Re: Just pulled ecm

Second, there is a single white wire with a factory connector hanging down with the ecm. It is not for the courtesy light, both wires are there. It doesn't look like it goes to the ecm. Any ideas? Thanks guys...Jim

I have that white wire with single connector dangling on my truck too. I have looked all over the place several times and never found anything that it is supposed to plug in to. I'll be interested to see if it really is supposed to plug in somewhere.
 
Top