keep or replace stock injectors?

jbone

jbone

Member
Ive been considering lately wether or not I should upgrade to 50lbd inj. or keep the stock inj. Im going to be upgrading the turbo to jwallers 57mm stock turbo upgrade or a 20G I was told so long as I increase fuel pressure the stock injectors will work fine. Since its spring im going over the whole truck to work out little bugs and wasnt sure if it was worth replacing the injectors, cleaning them, sending them out to be pro. cleaned and balanced, or what. Any suggestions? I know this is prob a stupid question but ill throw it out there.
 
SY756

SY756

New member
Re: keep or replace stock injectors?

Me personally, I would go with the 50#. But you could get by with the stockers with the turbo upgrades you stated you are planning. One thing with going to the 50's is you are going to need a new chip, more $$$. And by your sig you are running the Pitbull. So, if you need a new chip you might as well upgrade to a 3 bar chip. Then you need a new MAP sensor, more $$. But, it would be worth it just to be on the safe side for future mods. Just my opinion.
 
You must log in or register to reply here.
Top