largest lower heat exchanger available

Ross L

Member
I considered purchasing a aftermarket upper but wouldn't a larger lower make more sense?. The upper would just hold more "hot water" with the small lower unable to keep up. Is the upper ic a flow restriction on a stock truck? Although I do like the looks of Wallers ic :D

please delete if this has been covered more than 1000 x. :lol:
 
Last edited:

ChevelleDude71

Lo Boost
Re: largest lower heat exchanger available

Ross L said:
I considered purchasing a aftermarket upper but wouldn't a larger lower make more sense?. The upper would just hold more "hot water" with the small lower unable to keep up. Is the upper ic a flow restriction on a stock truck? Although I do like the looks of Wallers ic :D

there are after market lower heat exchangers, griffen makes one here are some links to get you started.

Here is an old thread from the mailing list.
http://www.syty.org/archives/syty/0010/msg00299.html

And here is what's required to fit the Griffin.
http://www.whitetyphoon.com/griffin_cche/index.html

And yes the upper intercooler is the bottle neck of our trucks air flow. Waller makes a good replacement one, I agree it looks great, but I have not tried it, have heard nothing but good things though.

Hope this helps :tup:
 

SyTyJedi

Jedi Council
Re: largest lower heat exchanger available

As long as you are getting the water temp down to ambient the stock lower is fine IMO. Put a good pump and some fans on it. My inlet temps were always at ambient with this setup. All you can do at that point is upgrade the upper due to the better flow and less pressure drop, which is what you are doing.
 

ghettosled

SYTY SUPERSTORE
Re: largest lower heat exchanger available

for a stock setup you would want to run an additional aux cooler for increased fluid capacity, a higher flowing pump triggered with ign power, distilled water with water wetter only (no coolant), and possibly a fan on the backside of the lower cche.

however the only way you will achieve ambient air temps with a factory style A/L setup is with methanol injection,

I'd save the money on the lower CCHE and buy an alky kit.
 

TYTILIDIE

METH HEAD
Re: largest lower heat exchanger available

A2A rocks man. If you get a FMIC, you will be very happy. Unless you hack your hands up hacking your core up like I did. But seriously, saw a positive decrease in temps.
 

Ross L

Member
Re: largest lower heat exchanger available

Oh I love alky, have it on my GN and SVO but I told myself I'm keeping this one stock. I've convinced myself an aux. cooler or larger lower would be a reliability mod ;) Is the upper a flow restriction at stock boost levels(would I "gain" boost with a a/a). What am I talking about,,,,I'm leaving it alone. Thanks for all the input, no more replies....... PLEASE! :rotf:
 

turbodog

Donating Member
Re: largest lower heat exchanger available

I did some thermodynamic modeling of the stock CCHE a while back. It is definitely the weak point in the stock system. Aux CCHE radiators can help. The upper
IC appears to be less of a hindrance... but modeling it is dicey at best, because I've never seen a cross-section of it to know the exact dimensions of the heat exchanger.
 

nallj92

Active member
Re: largest lower heat exchanger available

i have a lower giffin and a spal fan on it with a stock upper, works good for me, but im using alky also
 

SyTyJedi

Jedi Council
Re: largest lower heat exchanger available

The stock IC has a pressure drop of about 2.5 PSI. The cooler is dense so it can cool down lots of air in a short space. Upgrading to the higher flowing unit drops it down to about .5 psi of pressure drop. The turbo doesn't have to work as hard and also results in lower air temps.
 
Top