Lets Play What Should My Syclone Run

Rob Pod

Rob Pod

Donating Member
My Syclone has 99 Vortec Heads, LS1 Springs, ARP Studs, Manley
SS Valves, Comp Cam Rockers, Eagle H-beams, Speed Pro Pistons,
Comp 412 Cam, 255 Pump, 60s, Turbo Tweak Chip, 3 Bar Map, PLX
Wideband, Kenne Bell A2A, 2800 Stahl Convertor, GT35, 3" Exhaust,
255/50 888Rs on Stockers, And Sticky 245/325 Nitto Invos on C6 Z06s.

Figuring 93 octane for 15psi and 100 octane for 18psi (Just to be safe).

Just wondering what my Truck should/could run on the track.
 
Rob Pod

Rob Pod

Donating Member
Re: Lets Play What Should My Syclone Run

Track Elevation 320 ft. (Lifted from the Cecil County Dragway Site)
 
It's just a six

It's just a six

Super Member
Re: Lets Play What Should My Syclone Run

What turbo do you have?
No methanol?
Do the brakes hold while boost launching?
Heads are stock, no oversize valves, no porting?
Your tune is good?

12.4?

If it has a great tune, hooks up, a best of 11.8?

Still do not know the answers to the questions I have though.
 
Last edited:
dgoodhue

dgoodhue

BuSTeD 4.3
Re: Lets Play What Should My Syclone Run

I would guess with a good tune and traction, I would think that it would squeak into the 11's @ 15psi. 3 psi should add another 45-50hp which would put you around 11.5 maybe slightly faster.
 
Rob Pod

Rob Pod

Donating Member
Re: Lets Play What Should My Syclone Run

Darin Built GT35 Hybrid
Mo Meth
Yes, the brakes hold 5+ no problem
I believe heads were cleaned up n bigger valves
Turbo Tweak Chip

dgoodhue said:
I would guess with a good tune and traction, I would think that it would squeak into the 11's @ 15psi. 3 psi should add another 45-50hp which would put you around 11.5 maybe slightly faster.
Click to expand...
Good to know.
 
autoaddictions

autoaddictions

Active member
Re: Lets Play What Should My Syclone Run

First pass without and data to fine tune the tune up. I'd say 12.1around 115. Capable of 11:50s with everything dialed in.
 
You must log in or register to reply here.
Top