Lighted TCC Switch ?

Sean Krupa

Moderator
Re: Lighted TCC Switch ?

Ron,

I'm definitely going to get a double pole, single throw switch and I'll let you know how it turns out when I get it in.

Thank You,
 

Sean Krupa

Moderator
Re: Lighted TCC Switch ?

Ron,

I got that switch in that you recommended. It is made by Swann and a series 50 switch. There is no instructions and on the back of the switch it is numbered:
6 3
5 2
4 1

12v
The 5,4 2, 1, have the prongs

Do you have any idea on how to hook this up?

I very much appreciate all your help.

Sean
 

V8 Sonoma GT

Mile High SyTy
Re: Lighted TCC Switch ?

check continuity with switch on. see which ones are isolated together. If its the right switch then nothing should ring out with switch off. then with switch on, 2 seperate pairs will ring out. does this make sense?

also i am assuming that is is only has 2 pairs of N/O, which is most common. the missing numbers are likely for the N/C that are not there.
 

V8 Sonoma GT

Mile High SyTy
Re: Lighted TCC Switch ?

SWANNIOROCKERSW104A250VACDPSTSERIES50SINGAPORE268X22X19mmW2RSCH25_zps54cc6113.jpg


Does it look like this?
 

V8 Sonoma GT

Mile High SyTy
Re: Lighted TCC Switch ?

Im about to feel really bad about this one. In rushing to get an example, I didnt think about the contacts, as far as only having 1 set per pole. I see now that the one i posted is a On/Off. Which would mean one set is N/C. I hope Im wrong. so ring continuity between the separated circuits. If Im right then one set will ring thru with switch on, one will ring thru with switch off. Sorry Sean. In my work I never have to think about On/Off, because any device I would be using has both sets of contacts. So when i read on/off, i figured they were talking throw, not the poles. Let me know
 

Sean Krupa

Moderator
Re: Lighted TCC Switch ?

Ron,

Without getting too complicated cause I'm not really electrically inclined, I have 2-switches here that I checked for continuity. The first switch is just a on/off non lit switch that I got continuity when I turned the switch on checking with my meter. The new switch with 4-contacts has a LED for the on position. I get continuity on one side of the switch and also the same on the other side of the switch. Is this the switch I need.
I'm going to try the simple on/off non lit switch today and see if that works which it should to lock the TC.
 

V8 Sonoma GT

Mile High SyTy
Re: Lighted TCC Switch ?

So im guessing it meters thru on 1 & 4, then on 2 & 5. If it does that with Switch on, then you are golden. Just make sure that 1 ONLY meters thru to 4, and 2 ONLY to 5. 4 ONLY to 1 and 5 ONLY to 2.
Last thing is figure out which set illuminated the LED. turn switch on, and touch 12+ to the various prongs which ever one lights it up, use that set of contacts for the aux LED
 

Sean Krupa

Moderator
Re: Lighted TCC Switch ?

Ron,

Here is what it is reading with the switch on :
1,2, 0.00
4,5 0.00
1,4 0.04
2,5 0.04
1,5 0.04
2,4 0.04
 

V8 Sonoma GT

Mile High SyTy
Sounds like 1/2, and 4/5 are your contacts. Do you have an audible ring sound on your meter? That's the best way to test it...

Sent from my VS840 4G using Tapatalk 2
 

Sean Krupa

Moderator
Re: Lighted TCC Switch ?

So I got the regular on/off switch working with my Aux LED on the pillar. Took it for a spin and works great, both on and off. The LED even partially lights up when the TC locks up at 35mph switch off.

Pulls like a monster with the switch on! Thanks for all your help Ron! :tup:
 

V8 Sonoma GT

Mile High SyTy
Re: Lighted TCC Switch ?

well im glad you finally got it figured out Sean. i will prob do this same thing when I get my trans done
 
Top