Look at my DM file

cameronsclone

New member
Anyone want to take a peek at my DM file. I need to turn up the FP it's knocking more and is lean most of the time. Post up your email or pm me. Thanks.

Edit: Is it normal for my TPS not to go above ~90%? Maybe my floor mat or carpet is in the way of the pedal.
 

91blazins10

Active member
Re: Look at my DM file

well you had a code 35 iac error, id take a look at the iac, you really had a bunch of knock whenever the egr kicked in and heated up the intake, maybe time to block it off, ia temps seem a little high(how hot was it out?),when you had almost 16 degrees of kr it seems like it was false because you werent even building boost at the time. Also your boost control seems really inconsistent. Three questions Do you have a pitbull chip? whats you fp set at? Do you have a stock turbo?
 

cameronsclone

New member
Re: Look at my DM file

Conley Magnum chip, dunno what afr is set at, try to just adjust it after every run to get a good blend, but this weekend I messed with it and went real lean. I had it set almost perfect for a while:(. Oh and it's a stock turbo. Who sells those block off plates? Someone had some not too long ago. Thanks for lookin at it:tup:.
 

supersports10

New member
Re: Look at my DM file

looked at it... couple of things...

1. egr HAS to go!!!

2. tps should go to 100% never goes above 89% remove floormat, and try agian.

3. 02 mv are all over the place, should be around 900 to 950 check ALL vac lines twice.

4. your boost control is crap... it hits 8.3 then levels out at 6.5:tdown: :tdown:
i know you are going wot, because it only hit's 89% :roll:

hope this helps.. i'll look some more later.:tup:

EDIT: nice sy i love the grey cladding.. did you paint it? or buy it that way??
 

supersports10

New member
Re: Look at my DM file

cameronsclone said:
Conley Magnum chip, dunno what afr is set at, try to just adjust it after every run to get a good blend, but this weekend I messed with it and went real lean. I had it set almost perfect for a while:(. Oh and it's a stock turbo. Who sells those block off plates? Someone had some not too long ago. Thanks for lookin at it:tup:.

sy2932 will hook you up... he makes nice ones that actually fit.:tup:
 

cameronsclone

New member
Re: Look at my DM file

Painted it. Used to look like this:
photoshoottours219.jpg

photoshoottours248.jpg

photoshoottours221.jpg
 
Top