Looking for cylinder head compilation - head flow # please

Turbeau

New member
Hello everyone, I've been looking through this vast site for days however I haven't been able to come across any flow numbers for common path cylinder head upgrades.

I do believe that upgrading the stock cylinder head will yeild benefits to reduced detonation, am I correct? So essentially anything is better than stock?

I do believe Brodix makes heads from what I've read, and people swap Vortecs?

Please help with some clarification if you happen to have the data, thank you! :)
 

nallj92

Active member
Re: Looking for cylinder head compilation - head flow # please

ive got a spreadsheet i made last year, I'll throw it up once i find it.
 

jwaller

Evil Genius/SyTy Guru
Re: Looking for cylinder head compilation - head flow # please

the numbers you seek are here you just have to find them. I myself have posted vortec and brodix numbers.
 

MRKING

New Parts for Old Trucks
Re: Looking for cylinder head compilation - head flow # please

I will also agree the numbers are out there . Vortecs seem to be the best bang for your buck option with some mods needed to fit them . L35's are a direct swap with marginal gains , and brodix/pontiacs/bowties can be installed for the serious racers . Most of those last 3 require specific intakes , jesel valvetrain , and headers . With extensive porting you can have anything from 280-360+ , it just comes down to how much money you want to sink into them .
 

WyoSyclone

Active member

Turbeau

New member
Re: Looking for cylinder head compilation - head flow # please

Thank you all very much! I've found some excellent info. It looks like only a couple would be worth the trouble, however some of these look like they probably wouldn't belong in the stock bore, such as the Aluminum Chevy 359 / 523 18 Deg Hutter Alum. It's got a 2.15 inch intake dinner plate, I mean valve... Valve.

There are so many weird nuances with the SY/TYs, it's almost makes everything fun and interesting. Running 4 bolt mains from small blocks etc etc, lots of little paths to take.

I'm assuming for anyone here running a set of aluminum heads that you've found a significant improvement in knock mitigation?
 

WyoSyclone

Active member
Re: Looking for cylinder head compilation - head flow # please

I'm assuming for anyone here running a set of aluminum heads that you've found a significant improvement in knock mitigation?

Vortecs will take care of your knock issues.... IF the tune is optimized. From what I've read the L35's help with knock but not as much as the Vortecs. The stock fast-burn heads suck for knock.
 

MRKING

New Parts for Old Trucks
Re: Looking for cylinder head compilation - head flow # please

Is your syty just a toy or do you need reliability ? The cheaper options have worked well for many owners , what are your goals for the truck ?
 

Turbeau

New member
Re: Looking for cylinder head compilation - head flow # please

I'm probably a combination user, some light work duty (house requirements, haul sheet rock, some tools and garbage now and then). Part street, should be good for daily duty but only really driven a couple days a week. Track should be faster than it's stock mid 13 ish times.
 

JKsSyclone

Active member
Re: Looking for cylinder head compilation - head flow # please

I'm probably a combination user, some light work duty (house requirements, haul sheet rock, some tools and garbage now and then). Part street, should be good for daily duty but only really driven a couple days a week. Track should be faster than it's stock mid 13 ish times.

Hauling sheet rock, tools and garbage? :no:
 

dgoodhue

BuSTeD 4.3
Re: Looking for cylinder head compilation - head flow # please

I'm probably a combination user, some light work duty (house requirements, haul sheet rock, some tools and garbage now and then). Part street, should be good for daily duty but only really driven a couple days a week. Track should be faster than it's stock mid 13 ish times.

I would start think about changing the heads/cam when your in the mids 11's otherwise stick with the stockers. Their are most cost effective mods to do before then.
 

dgoodhue

BuSTeD 4.3
Re: Looking for cylinder head compilation - head flow # please

Hauling sheet rock, tools and garbage? :no:

Depends on what kind of Syclone he is buying, a low mileage mint or well used one that are much more norm found these days. I occasionally haul garbage, yard waste, and some bigger item in my Syclone (of course I am super careful not to scratch anything). My bed was already scratched up before I bought it. I definitely wouldn't use it as a work truck.
 
Top