Looking for tuning system....

13.robb

New member
Had this truck For a number of years now. Looking to finally tune so i can drive past 3500 rpms. Here are my mods:

.030 bore wiseco 9:1 forged, cleaned up ports on stock heads. aftermarket turbo @950 cfm, applied technologies waste gate. bigger down pipe, full gibson exhaust. have been told it came from atr way back when, I have the walbro pump, rc550 injectors, afpr, air to air intercooler setup. electric fans, still have factory ac fully functional.

I am interested in a tuning system, i work a million hrs a week, so i need something that is somewhat user friendly to work with and wont take too much time to set up. Correct me if i am wrong or missing something. As of right now the ecm/chip is stock, so obviously its running rich @ idle and stumbles on its self. Either way it would be nice to be able to full throttle this thing and see how it is supposed to run. I have tried making some phone calls and pm'ing a couple vendors on here, Have not heard anything back, Thought i would post here and maybe someone can chime in with some options etc. Thanks in advance, Robb
 

Syclone22

Member
Re: Looking for tuning system....

The easy and best option is to install a Ultimate
chip with different settings so you can adjust
to richer or leaner fuel trims timing is also adjustable .
 

sytyguy

Moderated User
Re: Looking for tuning system....

Really, IMO there are two practical options:

1- TurboTweak chip - pretuned and allows finite adjustment of most needed areas. Has limitations on what can be changed by the end user but is far easier to plug-n-go and is more user friendly.

2 - Code59 - has FAR less limitations on what can be tuned and will allow you to tune your truck to it's maximum potential. BUT, it will require more work, more hardware, more time, and is less user friendly. It's also not as plug-n-go capable as you'll be borrowing a bin from a database of users with "similar" mods and tuning to fit your truck. Some bins fit like a glove on some trucks, some result in months of head-to-wall banging.

There are obviously options beyond those two (BS3, Holley, etc...) but we're comparing two of the sub-$300 options here. My advice is to choose the one that best fits your life and abilities. I'm one of the long-time tuners on here, but I have two kids in diapers so if I was starting fresh, I'd opt for a TurboTweak chip. It's just nice sometimes to not have to tinker with something all the time. And with Code59, I do (sometimes it needs it, sometimes it's my OCD wanting to fix every little thing).
 

Syclone22

Member
Re: Looking for tuning system....

Really, IMO there are two practical options:

1- TurboTweak chip - pretuned and allows finite adjustment of most needed areas. Has limitations on what can be changed by the end user but is far easier to plug-n-go and is more user friendly.

2 - Code59 - has FAR less limitations on what can be tuned and will allow you to tune your truck to it's maximum potential. BUT, it will require more work, more hardware, more time, and is less user friendly. It's also not as plug-n-go capable as you'll be borrowing a bin from a database of users with "similar" mods and tuning to fit your truck. Some bins fit like a glove on some trucks, some result in months of head-to-wall banging.

There are obviously options beyond those two (BS3, Holley, etc...) but we're comparing two of the sub-$300 options here. My advice is to choose the one that best fits your life and abilities. I'm one of the long-time tuners on here, but I have two kids in diapers so if I was starting fresh, I'd opt for a TurboTweak chip. It's just nice sometimes to not have to tinker with something all the time. And with Code59, I do (sometimes it needs it, sometimes it's my OCD wanting to fix every little thing).

You are correct Micheal ..
 

13.robb

New member
Re: Looking for tuning system....

Thanks guys. ill be digging into the turbo tweak and code 59 in the next few days. are both "meth" friendly?
 

sytyguy

Moderated User
Re: Looking for tuning system....

Being "meth friendly" simply means allowing for fuel to altered in a specific location in order to offset the added fueling ability introduced by the methanol injection. Both options offer fueling alteration, but code59 has greater range and flexibility in that area.
 

2kwik4u

Resident slow guy
Re: Looking for tuning system....

Does code59 have the integrated tables and control for methanol yet? I know there was discussion of that some years back, didn't know if it ever made it to fruition though.
 

sytyguy

Moderated User
Re: Looking for tuning system....

Does code59 have the integrated tables and control for methanol yet? I know there was discussion of that some years back, didn't know if it ever made it to fruition though.
Where you can integrate the activation wire from the controller into the ECM and have a table activate specifically for meth fueling? Nope, not yet to my knowledge. I have to redo the xdf for Paul soon (I should've finished it already :oops:), so I'll talk with Dig about the specifics of it.
 

2kwik4u

Resident slow guy
Re: Looking for tuning system....

Where you can integrate the activation wire from the controller into the ECM and have a table activate specifically for meth fueling? Nope, not yet to my knowledge. I have to redo the xdf for Paul soon (I should've finished it already :oops:), so I'll talk with Dig about the specifics of it.

Yeap, that was what I was thinking of. Will be a cool feature set when it gets in there.
 

sytyguy

Moderated User
Re: Looking for tuning system....

Yeap, that was what I was thinking of. Will be a cool feature set when it gets in there.
Agreed....and it will be flexible enough to accommodate N2O, water injection, etc... even a 2 step could be simulated. :tup:
 

13.robb

New member
Re: Looking for tuning system....

ok, Im not seeing any support from turbotweak for rc engineering injectors. Looks like ill be calling them Thanks for the info guys. Robb
 

13.robb

New member
Re: Looking for tuning system....

Again, thanks for the input. I didnt see if they supported the rcengineering injectors. I just sent an email to eric@turbotweak. Hopefully they get back in contact with me. didnt see a phone #. Its been about 10 days since i was able to breathe and last look at anything typhoon related due to work.
 
Top