Lower intake

[wildphil]

I forgot the locations on the lower intake were the studs need to go instead of the bolts. I have been searching with no luck. And am ready to bolt it to the heads.
Thanks
Phil

 

[Don W.]

Re: Lower intake

Drivers side: 1st, 4th and last
Pas side: 1st, 2nd, 3rd.

 

[Loeryder]

Re: Lower intake

I have it written on the wall in my storage locker. lol

 

[wildphil]

Re: Lower intake

Thank you Don.

 

[wildphil]

Re: Lower intake

You Guys are Great!

 

[Richard Le]

Re: Lower intake

Are the studs the same size as the bolts? The dealer gave me six 5/16-18 x 1-1/4" bolts and six 3/8-16 x 1-1/4" studs. Yep, they are different in diameter. Is that right?

 

[Don W.]

Re: Lower intake

I'm certain they are all 3/8c. The "studs" are actually what I call a studded bolt. No clue what the part number is but a bolt with a short stud sticking out the head allows you to torque the manifold and add the other pieces later. Make sense?

 

[Richard Le]

Re: Lower intake

Part number can be seen in this pic:

Do you have the torque sequence and torque specs for the bolts and studs?