dalwine250
Donating Member
what brand is everyone using ? likes-dislikes ?
dave
dave
man. boost controllers
- Thread starter dalwine250
- Start date
Loeryder
New member
Re: man. boost controllers
www.boostvalve.com
I am not much of a fan of manual controllers but this one is cheap and easy to use and more accurate than some of the "bleeder" type valves out there.
www.boostvalve.com
I am not much of a fan of manual controllers but this one is cheap and easy to use and more accurate than some of the "bleeder" type valves out there.
epix
Typhoon
Re: man. boost controllers
Dave
RJC Boost Controller
http://www.rjcracing.com/RJC_Buick_Products/BoostC/boostc.html
Super simple and works, its what Scott recommended and uses on all his turbo cars.
Dave
RJC Boost Controller
http://www.rjcracing.com/RJC_Buick_Products/BoostC/boostc.html
Super simple and works, its what Scott recommended and uses on all his turbo cars.
dalwine250
Donating Member
Re: man. boost controllers
i have a rjc but i cant dial it down.
i have a rjc but i cant dial it down.
attackdog
New member
Re: man. boost controllers
Do you have a diagram on how to hook the MBC up? That would be great. Thanks.
-Dean
4C FED said:I have TurboXS BC-HPBC.
Seemed to work just fine.
I wish I would have bought the dual-stage controller so that I could switch between hi & lo boost without opening the hood.
Do you have a diagram on how to hook the MBC up? That would be great. Thanks.
-Dean
4C FED
Absolutum Dominium
Re: man. boost controllers
You are in luck. One of the few times I could actually find something.
Although there really isn't a diagram for it. More like an installation guide with instructions on how to setup the controller.
If it's for the stock turbo imagine there is no wastegate solenoid & all you have is a hose from the pressure nipple on the turbo to the wastgate actuator. Cut the hose in the middle & install the MBC in the middle. Or if you prefer to get pressure from the intake manifold you would need to plug the pressure port on the stock turbo and install the MBC between the intake & the wastegate actuator.
If you have the same MBC as the one I posted & are missing the directions, I can copy & post them tomorrow.
attackdog said:
You are in luck. One of the few times I could actually find something.
Although there really isn't a diagram for it. More like an installation guide with instructions on how to setup the controller.
If it's for the stock turbo imagine there is no wastegate solenoid & all you have is a hose from the pressure nipple on the turbo to the wastgate actuator. Cut the hose in the middle & install the MBC in the middle. Or if you prefer to get pressure from the intake manifold you would need to plug the pressure port on the stock turbo and install the MBC between the intake & the wastegate actuator.
If you have the same MBC as the one I posted & are missing the directions, I can copy & post them tomorrow.