Mechanical FP Gauge Questions

Syclone#1992

SyTy.net Moderator
When I install the mechanical gauge and line on the fuel rail, will the air in the line create any problems? How much gas will bleed out of the rail when I take the schrader valve out?
 

hamrhead

Donating Member
Before you remove the schrader valve, get a rag and something to depress the valve with to release the pressure. Maybe an ounce or two will squirt out. Just watch yer eyeballs in case!! Then you can remove the valve and install the gauge. If you're just running the line directly to the gauge air in the line shouldn't be a problem(I never had a problem with this anyway). DO NOT run this into the cab. If you want the gauge in the cab, get an isolator.
 

Syclone#1992

SyTy.net Moderator
hamrhead said:
DO NOT run this into the cab.


LOL, Mike I know better than that! :lol: :roll: I just want something in the engine bay so I can adjust ithe FP and check it periodically.


Thanks for the reply,
 
Top