Mega Squirt Again

kessler

New member
Ok now i know this topic was run awhile back but i never got around to reading it into detail.

So what i would like to know is has anyone run this or tried it yet? And if so i need some info on some of the installation and some of the tuneing, Theres a couple of us here on Omaha that might want to run it. I have a friend that is like a wizz on the Mega Squirt but hes out of town for a couple of weeks and i think id like to get the jump on what i need to know.
 

kessler

New member
Re: Mega Squirt Again

Yeah he's here in Omaha as well but for some reason i lost his #, and ive pmd him already, Oh well ill start playing with it and see what i can do
 

ashman

------
Re: Mega Squirt Again

you guys, PLEASE, document everything and post your experiences. this could make for some good info for the rest of us
 

kessler

New member
Re: Mega Squirt Again

Well i wont be into the Computer to much untill spring when i get my Motor up and running but ill keep everything on file, And ive already got planes to do all this on a AWD Dyno so youll be getting the corect Settings and #s
 

JayLo

Sir Boost-a-Lot
Re: Mega Squirt Again

Kessler,

I'm getting very close to completing the MegaSquirt install on my Syclone. I finally have all of the components need. Scott Clark and I are going to get started this evening. As soon as I?m done (hopefully by next weekend), I will share all of the details.

As of today, I have made a list and taken pictures of everything needed, though I?m sure there will be a few more odds and ends as we get Squirting. For anyone interested, I will put together a full write-up of how we did it, with plenty of pictures and diagrams, a complete parts list (as gnat?s ass as I can make it). My goal is to document it so any Joe with some tuning know-how can walk through the instructions and do the MS install himself.

The game plan is to strip the needed wires at the wiring harness by the stock computer and tap into them there for the MS. My goal is to retain the stock computer for IAC functionality and prevent the check engine light from coming on. Any wires we cut from the stock computer for the MS will have connectors soldiered on the ends to quickly reinstall the stock ECU if necessary (for troubleshooting or if I ever decide to sell the sucker, God forbid
icon_biggrin.gif
).

Being as anal-retentive as I am, I also want the install to be clean enough that it doesn?t look like I?m running a standalone EMS. The MS box will be installed under the dash by the stock ECU. The only extras in the engine bay will be the MSD 6A box, a line for the MS?s MAP sensor (2.5bar), and the LC-1 wideband (this will replace the stock narrow band) used by the MS and my new AF gauge.

For now, we are going to retain the stock HEI coil distributor setup (I?ve heard horror stories about a hotter spark frying the damn cap and rotor), but Scott is working on an LS1 coil pack setup for the MS. Once he has the bugs worked out with that and we get the truck running tits with the HEI, I will make the move to distributorless MS ignition (screw caps and rotors). Of course, I will make a write-up for that as well.
icon_smile.gif


My truck is essentially stock for now, but the MS will allow me to grow as much as I would like horsepower wise and easily tune the engine as I progress. I?ve kept quiet on this for a while now, but I?m very excited. Hopefully from this, we can get more Syty guys Squirting real soon.

I?ll start a new thread (sorry to whore yours) with all of the details after we get going tonight.

Later,
________
IOLITE VAPORIZER BATTERY
 
Last edited:
Top