Meth Kit Question

[kessler]

So i was Browsing E-Gay and found this. What are some opinions. It looks like it might be an ok kit to pick up. How ever i wouldn't mount it on the Trunk.

http://cgi.ebay.com/ebaymotors/EATO...ryZ33742QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[MRKING]

Re: Meth Kit Question

A nonprogressive controlled kit really shouldnt cost that much .

 

[H-TOWN-TYPHOON]

Re: Meth Kit Question

I like the packaging.

 

[92boostedty]

Re: Meth Kit Question

So i was Browsing E-Gay and found this. What are some opinions. It looks like it might be an ok kit to pick up. How ever i wouldn't mount it on the Trunk.

http://cgi.ebay.com/ebaymotors/EATO...ryZ33742QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

looks pretty sweet but i already have the battery in the back hummm you guys think this is good for our trucks?

 

[kessler]

Re: Meth Kit Question

I sent them a Question asking if they offer a Progressive kit and heres there web site.
http://www.alcoholinjectionsystems.com/Trunk-Mount-Systems/c37/index.html

 

[poorboy93]

Re: Meth Kit Question

There is a kit my Boss designed and sells called "Mr. Freeze" that you can find in the 2007 catalog on this link: http://www.andersonfordmotorsport.com/ that uses washer fluid.

It's a non-mechanical unit that's boost activated, jet moderated requiring no tuning on our trucks as long as you use the 1st of the 3 jets included. This style system was also used on WWII P-51 Mustangs, which I found to be pretty cool too!

 

[Flyin Ryan]

Re: Meth Kit Question

A nonprogressive controlled kit really shouldnt cost that much .

i agree, why not go with a progressive setup much easier to tune with etc..

I got a progressive kit from these guys http://www.alcohol-injection.com/
for $306 shipped and it works great

I've also had a kit from Julio at www.alkycontrol.com which was a really nice kit too if you have the funds.

 

[jpalmer]

Re: Meth Kit Question

i agree, why not go with a progressive setup much easier to tune with etc..

I got a progressive kit from these guys http://www.alcohol-injection.com/
for $306 shipped and it works great

http://www.alcohol-injection.com/

I've also had a kit from Julio at www.alkycontrol.com which was a really nice kit too if you have the funds.

i like the price of the first, is it good quality

 

[Flyin Ryan]

Re: Meth Kit Question

i like the price of the first, is it good quality

Yea it's pretty decent..... only thing I liked better in the alkycontrol kit that I had before was the fact that everything was braided an lines where as these guys supply you with teflon lined nylone tubing which is fine as long as it stays away from heat and from what they told me it's a higher heat tolerance and strength.

Control wise they both did a great job and both companies have great customer service and tech help in my opinion.

 

[Bump Stick]

Re: Meth Kit Question

Ok I am new to all this Alky/Meth injection stuff. I used to be a N/A and Nitrous guy.... I know it is a chemical intercooler, cooling the in coming air charge. And it also effectivly increases the octatane of your fuel preventing predetonation.

But progressive control? Jetting? I am assuming it like jetting you nitrous, different jets for larger/smaller shoots.

 

[rentedmule]

Re: Meth Kit Question

But progressive control? Jetting? I am assuming it like jetting you nitrous, different jets for larger/smaller shoots.

my progressive kit is wired into my MAF sensor output - it starts spraying at a preset MAF voltage and exponentially increases spray volume until it reaches a peak at a second preset MAF output. You can control it the same way using a boost pressure switch instead of the MAF output. you still have to choose the correct nozzle but it lets you control the amount of meth you're injecting so you don't use too much at lower boost pressures