Minimum/Maximum Boost Levels w/External Gate and Bleed Valve

hamrhead

Donating Member
Now that my KB Big Boy External Wastegate is working good, I can set the thing to open up as low as 9psi(which I like for street gas), but can only turn it up as far as 18psi. I'm using a simple Bleeder Valve to control boost.

Is there any way to get the boost up to say, 25psi, and still retain the low side of 9psi without changing springs in the wastegate?

Maybe one of those Boost Controllers would help me? I know basically nothing about them.

Any other options?

Thanks :D
 

ed hess

race or get outta the way
mike
the innovative msbc (multi stage boost controller)
is exactly what you need and will do what you are asking and more.

Imagine being able to set how much boost you want to stage at, how much to leave with, the rate of rise after you have left. want to change the boost part way down the track. does that too!

ed
 

hamrhead

Donating Member
If that's what is needed then that is what I'll get - - eventually. :D

To be honest I was hoping for a simple solution. What I mean is NO more wires/hoses to deal with! I want to get to the strip this Fall and get some runs in, and since the truck is running real good right now, I really don't want to change anything until afterwards. Changing/upgrading stuff has phucked me up too many times with this truck. Ya know, fix one problem and create another... :roll:

For now I think I'll just look for a stronger spring for the gate. Thanks Ed!

How much crap is involved to install a Boost Controller anyway?
 

ed hess

race or get outta the way
the last thing youwould want ot do is put a stronger spring in the gate.

with a weaker spring you can have that much more control of boost when staging and off the line with this controller!

This innovative unit has to be much better control than whatever your using now!

ed
 

hamrhead

Donating Member
Actually 'control' is excellent with my bleeder valve, as far as WOT boost is concerned. Super stable wherever I set it. Problem is I want a larger 'range' of WOT boost levels. Low boost (9-12psi) for street gas and as high as possible (say 25psi) for Race gas. This would be perfect for me.

Building boost while staging is no problem, and I generally want to run the same psi all the way down the 1/4. Keep in mind, I have no real desire to be a consistent bracket racer here. I just wanna have some fun.

So if my thinking is correct, a stronger spring in my wastegate will allow me to run a higher maximum boost than the 18psi I can get now, but it will raise my minimum psi level a bit too. For example, say instead of the 9-18psi range I have now, it will be something like 15-25psi. This is all I want, at least until AFTER I get to the strip this Fall.
 
Top