Modded Stock Turbo SOLD

1BADV6

Donating Member
This is a low mile stock turbo that has been modified to accept a 52mm compressor wheel. The exhaust housing and wheel are stock. This combination will provide a 20-25 HP increase while still allowing fast spooling with the stock torque converter. Turbo was used for less than 10K miles since being modified, truck ran great when turbo was removed, it has normal side play with no signs of wear or damage. Asking $450 plus shipping from 18929. SOLD

thanks,
 
Last edited:

Rice Eater

New member
Re: Modded Stock Turbo

Re: Modded Stock Turbo

Would this require a tune or can the stock program compensate for the additional air?
 

dgoodhue

BuSTeD 4.3
Re: Modded Stock Turbo

Re: Modded Stock Turbo

Would this require a tune or can the stock program compensate for the additional air?

IMO you wouldn't want to use the stock chip. However you could use one of the shelf 3 bar chips such as the ultimate or turbo tweaks should be fine running this turbo.
 

1BADV6

Donating Member
Re: Modded Stock Turbo

Re: Modded Stock Turbo

IMO you wouldn't want to use the stock chip. However you could use one of the shelf 3 bar chips such as the ultimate or turbo tweaks should be fine running this turbo.

I agree, one of the tuner chips would be preferred, although we did run this turbo on a stock truck with stock chip and with some added fuel pressure it ran well with no knock issues.

thanks,
 

JAY

Donating Member
Re: Modded Stock Turbo

Re: Modded Stock Turbo

Would this work with the Pitbull? I do have an aftermarket fp reg. just not installed yet.
 
Last edited:

JAY

Donating Member
Re: Modded Stock Turbo

Re: Modded Stock Turbo

Any discount w/o the w/g actuator & boost solenoid? Def. going to go this route.
 
Top