And for those interested, I plan to have the remainder of the tuning tutorials up after the holidays. Life has slowed my progress with those, but I plan to get the good stuff up soon.
Reading all this has me in the middle... I paid Nolan to help me tune my truck years ago but after completely rebuilding my truck from the ground up and doing just about everything myself I really want the satisfaction of tuning my truck as well. I know Nolan has been super busy and I've read a lot about tuning but I'm still a little Leary. I have all the hardware/software to do my own tunes but I'm still running a code 58 tune that Nolan did for me via email. I know that if I want optimal performance I need to dial it myself because being in the truck is way different than looking at a DM file sent via email. I really want to get into tuning myself but I have a lot of learning to do and it's just easier sometimes to datalog, email a DM file, download a .bin, burn a chip and repeat...
I would never claim to be one of the best, but I have been doing this a long time and know the benefits and caveats (including those called caveats by the uninformed) of tuning. I also know that tuning is NOT rocket science, and that if a truck is healthy otherwise, the tuning session can go very smooth. Improper tuning may lead to months of efforts or a year of learning to tune (as you say), but it's really not that difficuly. THAT'S THE POINT OF ALL OF THIS.....tuning is something that ANYONE can do given the equipment and the desire.Maybe I’m the exception. I had bad luck with Bins from 59.org. I was running 60's and it was like starting from scratch all over again. Way rich. It wasn't until Jeff Scott sent be a bin to where things started clicking. I checked the other day on E85 tunes and I don’t see many bins for that. I only know a hand full of people trying to use it. Oh and I don’t thing tuning on the street is just WOT. Drive-ability is way over half the tune.
30 minutes on the dyno can save you months of tuning on the road. You can hit cells on the fuel table and just hold it there if you want. Make changes instantly. And repeat. You don’t have to wait until you get to home or get to work to make changes and wonder if its going to work. You can also mic the motor to listen if you're getting real KR or false KR. You can see live data on torque an power from the changes you make. You can also work with a real pro that has done hundreds of tunes much like yourself. Much faster than an over email tune. Who said it only takes 30 minutes on the dyno anyways. I know tuners that spend hours tuning on a car. I also have met many tuners outside the syty community that swear by certain individuals tuning capability even though they are experienced tuners themselves. I have watched many owners on here. The ones that are the happiest and most blown away are the ones that have gotten professional help. Many, many happy Mike Lee and Nolan customers. I cant say the same for all self tuners. Maybe I’m wrong. Tuning is no longer a mystery to me. I’m not the best at it either. I just understand that other people are better at it than I, and I’m whiling to except that. If I put big $$$ into a motor, why not have the BEST tune it? Another question is... maybe SYTYguy is one of the best? I don’t know.
Keep it open. We're being civil and others may find beneficial info from it.
If you're saying I need to remember what it's like to be a beginner again, save it. I spend 4-5 hours a week helping SyTy owners tune (usually TP5RT with Moates hardware) and am constantly forced to think like a beginner to assist them. I completely appreciate the daunting appearance of tuning. That's the exact point....in order for tuners to show the non-tuners how easy it is to tune and help coach them, we are forced to realize just how green some owners may be and revert back to a introductory level of thinking. But it's not like tuners are rocket scientists and non-tuners are kindergarteners......in fact, the gap between us is not all that large and a non-tuner can be experienced in no time with the right approach and dedication. That's the beauty of the software and hardware we have now....it takes a lot of the difficulty out. Now back in the days when we were editing hex and covering uv erasers with a box to save our eyes....there might have been a larger gap....but not now.
You have a very solid foundation for which to begin tuning. The hardware that is recommended for tuning for yourself is:
- Emulator (Moates Ostrich 2.0 is most popular)
- ALDL Cable (USB style is most compatible with todays laptops)
- Laptop with Tunerpro RT (v5 is latest)
- Wideband O2 wired into ECM (*)
* not required to tune/datalog but a tremendous help in getting a solid tune
Total cost for equipment - $275-$475 (w/o WB - with WB) if you already have a capable laptop. From there, just hook up the equipment, grab the xdf and adx from code59.org and a starter bin and you're off. Play with idle and part throttle to get an understanding of how changes work and what they affect. From there, work on a conservative WOT tuning before going "whole hog". Holler if you need help. :tup:
I know my tune is in the ballbark but I've changed cams since Nolan tuned the truck. I know he's super busy as I've tried getting in touch with him in the past few weeks. So I know my tune is in the ballpark and I have tinkered with Tunerpro when I was making changes to chase an issue so I know I can do it. I really just need a tutorial for dummies that tells me what I need to shoot for and the best way to get there. I.e. Timing, fuel etc.. I'm sure its not rocket science but when you have zero tuning experience the knowledge needed feels a bit overwhelming.
I have NO problem with paying someone for their time. EVER. Hard work is rewarded ALWAYS. That said, where is a GOOD reliable tuner near me that you guys would trust with your own trucks? All you guys seem too far (GA,CA..).. AGAIN, I'm all ears!!!
I thought Turbo Time was your way?