MSD 6al wiring help...

SchnellGhostTy

New member
So just finishing the last few little things before I start her up again. but, kinda forgot where the msd wires are supposed to be going. Thanks in advance!
 

sy605

Member
Re: MSD 6al wiring help...

MSD makes a plug and play harness. If you have two connectors on the coil you will need the MSD to GM Dual Connector Coil Harness, PN 8876. If you have one connector then you will need the MSD to Single Connector Coil Harness, PN 8877.
 

SchnellGhostTy

New member
Re: MSD 6al wiring help...

was previously on the truck, I just dont remember where the ends go lol. I believe its the dual system. not sure if that helps...
 

SchnellGhostTy

New member
Re: MSD 6al wiring help...

I'm pretty sure I'm making this more complicated than necessary. I will connect everything as I think it should be and take a couple pics and see what you guys think. TIA
 

V8 Sonoma GT

Mile High SyTy
Re: MSD 6al wiring help...

for those who dont wanna piss away $35

WDTN_pn9615_Page_032_zpsa382cb96.jpg
 

Damian

Member
Re: MSD 6al wiring help...

The harness just makes it so much easier and takes the guess work out of it.
 

V8 Sonoma GT

Mile High SyTy
Re: MSD 6al wiring help...

What guess work? Even if you can't understand wiring diagrams, read the description. This is the most basic wiring imaginable, save 35
 

dgoodhue

BuSTeD 4.3
Re: MSD 6al wiring help...

The reason I bought the adapter is that I wanted something that I did not have to cut my factory wiring harness.
 

Don W.

Stab it and steer it
Re: MSD 6al wiring help...

Also makes it a lot easier to go back to the stock coil (keeping the 6al) which I've done. Based on my experience and some posts here, buy the harness and keep the stock coil thus saving the stock wires.
 

wildphil

I Love My Ty's
Re: MSD 6al wiring help...

Also makes it a lot easier to go back to the stock coil (keeping the 6al) which I've done. Based on my experience and some posts here, buy the harness and keep the stock coil thus saving the stock wires.

I have done this a couple of times myself. It just takes a few seconds to unplug the connectors from the harness and plug the connectors right back to stock configuration. Bypassing the MSD. Well worth the price of the harness.
 

Damian

Member
Re: MSD 6al wiring help...

Plus, if your MSD craps out like mine did and leaves you stranded, just unplug it and go.
 
Top