MSD Distributor Pickup Coil Question

[mrweelr]

I have an MSD Pro Billet distributor (#8367) on the Sy and I'm replacing a defective ignition module. I have pulled the two wires from the pickup coil to the ignition module and forgot to mark them before I took them off. One is black/purple, the other is black/red. The ignition module has two terminals, marked "P" and "N". Want to be absolutely certain I connect the two wires up to the right terminals so I don't fry the new module. Can someone tell me which terminals these two wires go to?

 

[Big Mike]

Re: MSD Distributor Pickup Coil Question

I have this distributer new still in a box I will check it and get back to you after work.

 

[mrweelr]

Re: MSD Distributor Pickup Coil Question

Cool, thanks a bunch

 

[Big Mike]

Re: MSD Distributor Pickup Coil Question

On My #8367 MSD Distributer

The wires are as follows:

Black wire with Orange stripe = N

Black wire with Purple stripe = P

 

[mrweelr]

Re: MSD Distributor Pickup Coil Question

Beautiful, thanks! This may also come in useful for someone else down the road.