Multi-Use Bracket Bolts

[DubJG]

Wonder if anyone could tell me what size/kind bolts hold the multi-use bracket (map sensor & ignition module bracket) to the lower intake. Girlfriend spilled a can of bolts and now I can't find em all....:rant:

 

[BoostedSUV]

Re: Multi-Use Bracket Bolts

You mean the MAP and Coil bracket? There are 2 3/8-16 studs with a 3/8 nut that hold that bracket to the intake.

 

[Don W.]

Re: Multi-Use Bracket Bolts

You mean the MAP and Coil bracket? There are 2 3/8-16 studs with a 3/8 nut that hold that bracket to the intake.

I call them studded bolts. Since it's a bolt that a) is one of the intake retention bolts (two total) that has b) a short stud coming out of the head of the bolt to allow a nut to attach and hold down the bracket in question. TMI ??:rotf:

 

[DubJG]

Re: Multi-Use Bracket Bolts

Yeah sorry map and coil

 

[BoostedSUV]

Re: Multi-Use Bracket Bolts

Don we're still talking about fasteners right? :rotf:

Studded bolt would be a better a description. It's 3/8-16 thread, 9/16 socket head.

 

[Don W.]

Re: Multi-Use Bracket Bolts

Here's a photo of the locations of those "studded bolts" over the entire intake. This should accurate for a stock motor. Any questions LMK

 

[DubJG]

Re: Multi-Use Bracket Bolts

Perfect! Thanks alot guys :tup: