My Slow Ty

live1053rulz

Nor Cal SyTy
I've had my Ty for about 6 months now, and from reading all of your posts for the past few months, I wouldnt doubt if I had the slowest Ty on the planet. My best run was was a 14.8 with a good reaction time. 60' came in about 2 sec. flat. Finished at 87.5 mph. Pretty weak! It is my daily driver. It's quite clean. So it's not super important that it be a rocket, but a little faster than it came off the showroom floor would be nice. I'm sorta thinkin it's time for a aftermarket turbo. The trucks got almost 70k miles now. I don't really know what to look for and how to proceed. If anyone's got any suggestions for my slow Ty I'd greatly appreciate it.
Thanks,
Steven
 

Syclone#1992

SyTy.net Moderator
Re: My Slow Ty

We all have to start somewhere!!! Did you launch it? I would definately try to hook up with some of the local SyTy'ers in your area and get datamaster on your truck, and try to do some tuning. I wouldn't jump right into the performance parts yet. I would do a nice tune up, plugs, wires, cap and rotor, and make sure everything is up to snuff ignition wise. Build yourself a base, and then go from there.
 

kwick6

Donating Member
Re: My Slow Ty

What they said.

Get datamaster before you start modding the truck. An aftermarket turbo is a nice change of pace from a stock turbo, but it won't make you extremely fast until you get the truck in tune.
 

live1053rulz

Nor Cal SyTy
Re: My Slow Ty

Thanks for you suggestions. Where can I get a datamaster and how much do you think it'll cost? Where can I learn about them?
 

VermontTy

Support Our Troops
Re: My Slow Ty

You can get datamaster from TTS Power Systems (http://www.ttspowersystems.com). $219. A software package and cable to attach to a laptop.

MANY guys here can tell you more about what your exact numbers and curves mean. Usually someone will post the entire .uni file and ask someone else to look for hiccups in their performance.

Example:

dm_tcc2.png
 
Last edited:

JSM

Active member
Re: My Slow Ty

Another datalogging option is tunerpro also.

Do a search and you will find everything you need to know on it.

Software is $30 to register, but free to try play with etc.

Add a cable and your set.
 

PPI Typhoon

DIY Madman
Re: My Slow Ty

Jer said:
Does anyone make a USB cable for this yet??

Craig Moates has one on the market. This is one of the reasons why I have not come out with one myself. I might here in the future, but I have some other projects going right now.

Problem though is that the USB adapter and ALDL cable comes out to be pretty spendy. So there's not much difference in picking up a USB-Serial adapter and an inexpensive ALDL adapter. Does the same job.

Oh, and Craig's site is http://www.moates.net if anyone is interested.
 
Top