need a little help

[pontiacws699]

Ok Im gettin pretty close to gettin this thing done. But I need some help. Iv got a few lines that Im ot sure were they go.

have no idea the long one and the short one

not sure what goes here

 

[tydye]

Re: need a little help

Ok Im gettin pretty close to gettin this thing done. But I need some help. Iv got a few lines that Im ot sure were they go.

blue one from the IC to the overflow? or radiator to overflow?
-
i believe the other ( top picture) goes right under the TB ill go take a picture.....
-
-
If it looks like this which it does, look under the TB you see an inlet.. i tried to take a pic but bad lighting in garage. either way you should have something there.
-

 

[SY2932]

Re: need a little help

If you are replacing the stock lines, check out the diagram on top of your radiator support. If it's unreadable, scroll down and look at the diagram in "tips" here. In the last pic, you appear to have a PTE turbo. There NEEDS to be an oil line going to that blue fitting because that's what keeps it lubricated. That wiring loom looks to be in bad shape too. It appears that it has been to close to the exhaust housing and has melted.

 

[pontiacws699]

Re: need a little help

If you are replacing the stock lines, check out the diagram on top of your radiator support. If it's unreadable, scroll down and look at the diagram in "tips" here. In the last pic, you appear to have a PTE turbo. There NEEDS to be an oil line going to that blue fitting because that's what keeps it lubricated. That wiring loom looks to be in bad shape too. It appears that it has been to close to the exhaust housing and has melted.

nope, i dont believe there stock lines. Yeah its a pte51. I believe the oil line is the steel braided line in the photo.

 

[pontiacws699]

Re: need a little help

If you are replacing the stock lines, check out the diagram on top of your radiator support. If it's unreadable, scroll down and look at the diagram in "tips" here. In the last pic, you appear to have a PTE turbo. There NEEDS to be an oil line going to that blue fitting because that's what keeps it lubricated. That wiring loom looks to be in bad shape too. It appears that it has been to close to the exhaust housing and has melted.

That wiring loom your talking about, you have an idea were it goes? I can find a connecter for it. I believe its a 2 prong. And i hooked up the oil line.

 

[WyoSyclone]

Re: need a little help

That wiring loom your talking about, you have an idea were it goes? I can find a connecter for it. I believe its a 2 prong. And i hooked up the oil line.

It's not the AC wiring so I'd suspect it's the coolant temp gauge loom. I'm 500 miles from home so don't have my books in front of me.. going off of memory