need hardware list for solid motor mount install

[cvcsmkr]

going to be installing the solid mounts with js pads.
would like a best possible install without having to go back and fiddle with anything.
what do i need?

 

[VermontTy]

Re: need hardware list for solid motor mount install

JS pads
Solid mounts
Jack stands or ramps
Floor jack
(6) Grade 8 bolts with washers (might as well put in new stuff)
As many 15mm - 9/16" - 5/8" wrenches as you can find (size depending on what bolts you get)

.....and finally, Gumby arms.

You will want to shoot yourself in the face before you're done; guaranteed.

 

[cvcsmkr]

Re: need hardware list for solid motor mount install

JS pads
Solid mounts
Jack stands or ramps
Floor jack
(6) Grade 8 bolts with washers (might as well put in new stuff)

i got beat up enough by rebuilding the front end.
my mechanic is going to be doing the motor mounts.
i already have the frame pads and motor mounts.
i am just looking for the hardware list, i.e. bolt sizes, lock washers?, etc

 

[turrrbo6]

Re: need hardware list for solid motor mount install

the bolts that hold the factory mounts are tight on every thread on removal, somewhat a pain. alot easier to do with the engine out.

 

[420]

Re: need hardware list for solid motor mount install

I'll be going to solid mounts when the new motor goes in. No more flexing

 

[cvcsmkr]

Re: need hardware list for solid motor mount install

thanks for the pointers everybody.
BUT ALL I AM LOOKING FOR IS A HARDWARE LIST

 

[turrrbo6]

Re: need hardware list for solid motor mount install

the original motor mount bolts are too long (the long bolt on each side) you will run out of threads before it becomes tight.I used a 7/16 grade 8 , I couldn't find ss in the length I needed.