need help, truck running bad.

Kybol

New member
Within the last few days my typhoon has started to act up. I was driving i tand all of a sudden it quit, and wouldnt start. it would start for a second if i held the gas wide open, and would sit there sputting and poping sometimes. If I let it sit for afew minutes it would start up and run fine for a while. The timing of this is totally random. Today on the way home it started sputtering and backfiring(shooting some sweet flames) then quit and the same thing again. I couldnt get datamaster to work today, so I thought I would see if anyone had any ideas of what it could be.

Thanks
 

SY2455

70's Veteran
Re: need help, truck running bad.

Check your codes, Sound like mine did just before the ECM went bad.
 

5SpdTy

Member
Re: need help, truck running bad.

mine did same thing was low on gas let it sit for 2 days put in gas and she ran fine. not sure if it was gas or sumtin else but def could be low on gas, dont let it go below 1/4 tank
 

TYTILIDIE

METH HEAD
Re: need help, truck running bad.

I say check your Ignition Module. You can pull it out and most auto stores can test it for you for free. Is the CEL coming on? As SY2455 said this can also be a bad ECM on its way out. If you check all those things and it still does it then check your ECM grounds.
 

Kybol

New member
Re: need help, truck running bad.

Yeah the CEL was on when it was running like crap, let it sit for a few min went off and ran fine. It will probably happen again, just dont know when. I will try and get datamaster working tonight.
 

Kybol

New member
Re: need help, truck running bad.

Anyone know if the module is the same as a 90 305 engine?
 

TYTILIDIE

METH HEAD
Re: need help, truck running bad.

I would imagine they are different but I guess you neer know. What codes are you getting? You need to find that out first and then I could help you out a lot better.
 

Kybol

New member
Re: need help, truck running bad.

Got datamaster working and there is no codes now, there was a rich o2 one before but it is gone. I might have to drive it till it happens again and have datamaster hooked up this time.

also, how do I change my foglight bulb?
 

Kybol

New member
Re: need help, truck running bad.

What do I have to do to get to the ECm and check the grounds?

Thanks
TYTILIDIE said:
I say check your Ignition Module. You can pull it out and most auto stores can test it for you for free. Is the CEL coming on? As SY2455 said this can also be a bad ECM on its way out. If you check all those things and it still does it then check your ECM grounds.
 

93ty475

Donating Member
Re: need help, truck running bad.

that happened to me once....Ended up being a bad ECM as mentioned above....On my truck, I tried to drive home (max achievable speed=25mph) and my egt gauge was going through the roof and my downpipe wrap was smoking....I popped in a spare ecm and I was back to killing ricers again....I guess whatever failed in my ECM had something to do with the ESC.....be careful driving it around as you could hurt something if it's doing the same thing mine did... :2cents:
 

Kybol

New member
Re: need help, truck running bad.

I changed the module last night, I will let you guys know if it helped.
 

Kybol

New member
Re: need help, truck running bad.

Well, it quit again, so I guess I will have to try the ECM. How Do I get to it and wha do I have to check out?
 

Robert Lone

MUTANT
Re: need help, truck running bad.

My brother had the same symtoms. He put 4 computers in it with no change. It was actually telling all injectors to fire all the time flooding the engine. Hence the semi-start at wot and sweet flames. It turned out to be the PROM and not the computer. His was also a '92.
 

10secTy

Sy-Ty builder and Tuner
Re: need help, truck running bad.

Pull the ECM down and let it sit on the floor. Unplug it and replug it in.Also check all the wires and make sure non have pushed out of the ecm connectors.

Also pop out the memcal and plug it back into the ecm. It might have just worked its way loose. If that does not make a diff I would look at a ECM I have ones you could borrow if you want to see if thats the problem.

Nolan
 

Kybol

New member
Re: need help, truck running bad.

k, thanks Nolan, I will try that and get back to you guys. Is it just behind the glove box?
 

SY2455

70's Veteran
Re: need help, truck running bad.

You need to remove the lower trim panel on the pass side of the truck, below the glove box. You will find a bracket that hold the ECM up in place. On some trucks you may have to remove the pass side kick panel. The ECM fit is a tight fit, so be carefull and have lots of patience.
 

Kybol

New member
Re: need help, truck running bad.

ok, I unplugged the ECM and plugged it back in, and it started up.
A guy was telling me this was happening with his s-10 and he got a new key and nothin gever happend after that. Could it be the ignition switch, cuz it does seem a little "wobbly" maybe something shorting?
Any other ideas?
thanks
 

SY2455

70's Veteran
Re: need help, truck running bad.

Kybol said:
ok, I unplugged the ECM and plugged it back in, and it started up.
A guy was telling me this was happening with his s-10 and he got a new key and nothin gever happend after that. Could it be the ignition switch, cuz it does seem a little "wobbly" maybe something shorting?
Any other ideas?
thanks

I don't think so, because the ignition switch is actually mounted on the steering column with linkage going up the column to a slide and gear arrangement in the simplest form of explanation. being it started up you may want to check all the grounds in the electrical system. You may also want to pick up a spare ECM. when I pick up my spare it was $85.00
 
Top