Need help with burner software

Sy769

Donating Member
Hi I finished assembling my DIY burner. I am having a little trouble understanding how to setup the software. I am going to try out the 29C256 chips. I need to set it up to burn the last 16k of the chip right?? So far I haven't figured out how set it up. If anyone has the time the software is free and I'd appreciate a look
http://batronix.com/electronic/downloads/assembler-download.shtml


Also I am going to call around today and see if I can find some 29C256 chips in town. Anything special to make sure I get or do not get? brands,etc.


I hope I can find some and figure out the software and burn my first chip today woohoo :lol: (Just simple stuff first-No more Egr codes)

TIA
 

Mick

New member
If you cannot find the Atmel chips locally, you can get them here :

http://moates.net/gmecm/hworder.html

You may also want to check out the bank switch circuits that Craig offer's. If they work on the SY/TY PCM, which I believe they do, it can make all that unused space on the 256k chips very valuable. :)

My software GMPCM, has the capability of stacking binary files for a multi-chip burn, which will allow one to have multiple $58 binaries all on one 256k eprom, switchable using one of Craigs circuits.
Since you can then have different versions of the binary, you might have one optimized for mileage, one for valet mode, one for medium level performance, one for all out performance, etc..

This can also make testing changes to the binary code much easier. For example, if one were optimizing injector flow rates, you could burn a chip with each of the files having a slight increasing/decreaseing injector constant, and then switch until you find the one that yields the best results.
 

kwick6

Donating Member
Mick said:
If you cannot find the Atmel chips locally, you can get them here :

http://moates.net/gmecm/hworder.html

You may also want to check out the bank switch circuits that Craig offer's. If they work on the SY/TY PCM, which I believe they do, it can make all that unused space on the 256k chips very valuable. :)

My software GMPCM, has the capability of stacking binary files for a multi-chip burn, which will allow one to have 16 different $58 binaries all on one 256k eprom, switchable using one of Craigs circuits.
Since you can then have different versions of the binary, you might have one optimized for mileage, one for valet mode, one for medium level performance, one for all out performance, etc..

This can also make testing changes to the binary code much easier. For example, if one were optimizing injector flow rates, you could burn a chip with each of the 16 files having a slight increasing/decreaseing injector constant, and then switch until you find the one that yields the best results.

Mick,

If your familiar with Craigs setup, can you check out this post for me and tell me if the 256 is seated correctly, as well as the jumpers in the right position, in the pics I linked down towards the end of that thread.

http://syty.net/phpBB2/viewtopic.php?t=21305

thanks,
Scott
 

Mick

New member
It looks good to me... but I dont have that exact bank switch.
Did you verifiy that J1 also needs to be moved for the AT29C256, J2 obviously does, but I am not sure if J1 would or not.

Have you tried it out yet??
 

kwick6

Donating Member
Mick said:
It looks good to me... but I dont have that exact bank switch.
Did you verifiy that J1 also needs to be moved for the AT29C256, J2 obviously does, but I am not sure if J1 would or not.

Have you tried it out yet??

This is Craig's latest version of the original P3 adapter. I haven't tried it yet, but thats one way to find out I guess. :)

thanks,
Scott
 

Sy769

Donating Member
Ordered some chips from Craig.

I think I figured out the burner software. Just needed some sleep.

I like the idea of the multi-programs on one chip for tuning but for now I am gonna start out the old fashioned hard way of changing chips until i get tired of swapping.

Downloading the GMPCM software now to have a look.
 

Mick

New member
The multi-burn feature is nice as you can just double up the same file and export a 32k binary ready for burning. That way you don't need to mess with offsetting the start address within the burning software.

Another very useful function of my software is in its comparison features.
For example: I always keep a separate PCM file with an untouched stock binary. That way I can open it along with my current "work" file, and just do a "compare" to obtain a list of all the areas that I have changed. A double click on any of the items in the "comparison results" will take you directly to that item in the pcm files. You can switch back to the "comparison results" by selecting it from the "Window" menu list.

The functionality of the software is also increased if you have a version of Microsoft Excel installed.
 

InvisiBill

Active member
Re: Need help with burner software

Sy769 said:
I am going to try out the 29C256 chips. I need to set it up to burn the last 16k of the chip right?? So far I haven't figured out how set it up.

From http://www.thirdgen.org/newdesign/tech/promintro.shtml, which was linked in http://syty.net/phpBB2/viewtopic.php?t=16890...

For the DOS method just take the BIN you wish to program and name it test1.bin. Copy it. Rename the copy test2.bin. Finally, go to a DOS prompt and type "copy /b test1.bin+test2.bin test.bin" (without the quotes).

You can use the + option with the DOS copy command to concatenate files. "/b" tells it that they're binary files. Just create your BIN file(s) and use copy /b chip1.bin+chip2.bin+chip3.bin+chip4.bin bigchip.bin to combine them all into one bigchip.bin file. If you just want to fill the whole chip with copies of the same thing, you can use copy /b chip1.bin+chip1.bin+chip1.bin+chip1.bin bigchip.bin too, I believe. You really are just tacking multiple chunks of data together as one big file...
 
Top