Need some help (ordering injectors)

SyTyAddict

Member
All of my Code59 stuff has come in and I was about to order some of the siemens #60 high-z injectors, but I have come to realize that the ecm is modded for low-z (Peak and hold). I was going to order the #60's because I hear about how easy they are to tune and their awesome driveability, but now I'm kind of lost in regards of what to order. I want something that has great drivability and are not a bitch to get running decent.

The most notable mods are:
  • 8.5:1 cr
  • L35 heads (supposedly ported)
  • cam with 215/210* .334 lift on 114lsa
  • atr intercooler with upgraded heat exchanger
  • atr headers
  • gt3082r 0.63 a/r (likely upgrade to pte 6262 or 6265 in near future)
  • dis ignition
  • atr exhaust
  • 2800 stall

Thanks,
Clay
 
Last edited:

T-Bone

Active member
Re: Need some help (ordering injectors)

I sure do miss that truck.....you gonna be able to come to the meet at the Kellers (Hendersonville, TN) on the 21st with it?
 

SyTyAddict

Member
Re: Need some help (ordering injectors)

I plan on running around 18 psi for now, when I eventually upgrade the turbo i will probably run meth injection and take it to around 25 psi.

T-bone,
I am planning on being there. I have it kind of taken apart right now, but it will be back together in the next few days. I have the solid motor mounts installed, but the diff is still out while I'm waiting on some new seals. Btw, your lsx Syclone is looking good, hopefully I can make it to the get together and check it out.
 

SyTyAddict

Member
Re: Need some help (ordering injectors)

I feel kind of dumb that I didn't realize this earlier, but there would be no issue running high-z injectors with a ecm modded to run low-z, correct? If I can run the Siemens (Mototron) #60 high-z with the modded ecm that might still be the way to go from a driveability and mileage standpoint.
 

JSM

Active member
Re: Need some help (ordering injectors)

If your goals are high 10's or slower the 60's will be more than enough, no reason to go bigger.

Keep in mind, code59 might not be plug and play for you directly with the DIS in there. Be glad to try to help you get code59 going at keller meet if you have all your ducks in a row, but with the DIS you have a 1 off nobody else has done so be ready.
 

SyTyAddict

Member
Re: Need some help (ordering injectors)

I'm going to go with the #60's, from everything I've read they seem to work very well. As far as code59 and DIS, I have read about everything I can find concerning it. From my research it appears that I have to do a few thing to the timing table with regards to the max timing advance and the reference angle. I think I have it figured out decent, but you never know until you actually try it. I'm sure I'll have plenty tuning questions for you, regardless.
 

T-Bone

Active member
Re: Need some help (ordering injectors)

T-bone, I am planning on being there. I have it kind of taken apart right now, but it will be back together in the next few days. I have the solid motor mounts installed, but the diff is still out while I'm waiting on some new seals. Btw, your lsx Syclone is looking good, hopefully I can make it to the get together and check it out.

Awesome. I never took the time to exploit that particular Syclone but it would be great if you are able to come. I plan to bring the LSx Sy and you can have a free ride in it :).
 
Top