Need values for VE Generator

MadMike

Member
I am looking to fill out the fields in this VE generator to get me somewhere safe to start tuning. I'm running a GT35 on a LB4 with a 2111 conversion intake stock cam.

Thinking of starting with the 6# spring and go to the 9 until I get the forged parts n splay.

Figuring 400hp is the most I want to push a stock 4.3. Thinking 9psi is definately there if not pushing it.

Really need some estimates for flywheel HP and TQ and at what RPM to make it work.

I figure I can use N/A values for the non boosted part but I really need you guys to get me started in the boosted region. And feel ok guessing HP but not TQ.

Any power estimates or examples for me to start with?

XXX HP @ XXXX RPM
XXX FT/Lbs @ XXXX RPM
 

JSM

Active member
Re: Need values for VE Generator

Depends what system you are using as to how accurate those #'s will be. My gut feeling tells me your wasting your time trying to get a base tune this way.

For example the stock ECM only has a VE % of 0-100%. Guess what turbo motors run over 100%.

So in order to make it work other numbers are adjusted. I suspect aftermarket systems are also not accurate VE's #'s but purely a reference # you adjust up/down as needed.
 

MadMike

Member
Re: Need values for VE Generator

I can appreciate that. I am running a Megasquirt and they have the breakdown of the calculations so I can see how they come up with it. I guess your right about what people report and what they were on.

I was just hoping to get in the ball park so I did have crazy feedback to sort thru. I'm feeling there won't be any easy answers. I'm just going to have to slowly sneak up on it.

Can anyone ball park the spark timing in a few spots def towards the safer side?

This is just my first tune and I just want to know a general idea of what the numbers should be so when I use things like the generator and tell whether or not it’s just garbage.
 

hrodgmc

New member
Re: Need values for VE Generator

I thought the VE's were learned when you drove megasquirt and a W/B or was this the newest beta. VEM's has been working on this for a while.

Unless you've got Matlab or something similar, I also think you are shooting in the dark.
 

MadMike

Member
Re: Need values for VE Generator

There are auto tune programs that work with MS. But if you don't have your tables close then it will bounce all over the place and mess up the tune.

I'm getting the idea. I will just guess on the #s for the generator then I'll have something except a flat table.(def not a working table/safe but a start) Then I will work the table lite load to heavier. Maybe use the auto tune later to speed up the process.

Thanks for the help. Or drilling it in my head. haha
 

dgoodhue

BuSTeD 4.3
Re: Need values for VE Generator

I wouldn't spend a lot time on this. The injector chosen (and how linear it is) is going to play a big role in your ve table.
 
Top