New Aftermarket computer tidbits

smeagol

Active member
Figured I'd make a post about this in tuning section, for those people interested in aftermarket computers. Those who are looking to get something in the future will want to keep an eye on the releases this year.

There are a couple new ones due out this summer (I know of 2 offhand). FAST has a new one due out, and Big Stuff 3 is due out.

FAST- haven't heard much, but it sounds like it will be similar to the current FAST, with more I/O. Almost certainly won't be compatible with the old one (meaning this isn't a firmware revision, this is all new hardware). I/O = input/output for those not computer-ese. More sensor input availability, more output control. What I've been begging for. Not sure how flexible, still haven't heard much on this.

Big Stuff 3 - I'm really excited about this one, as it is being created by John Meaney - pretty much the father of the aftermarket fuel injection. He created the first DFI, and the first Speedpro unit. He'll be back with this new unit. Only heard tidbits about it, but so far it offers drive by wire with traction control, and it will have some sort of block learn correction - based on wideband 02 data.

So far, my plans are to run the stock computer, but if either of these show themselves to be amazingly capable, possessing killer features, with bargain prices... i may jump ship. I have many 'wants' of an aftermarket computer, so far the current DFI and FAST systems aren't up to snuff for me. We'll see how the new stuff looks.
 

Pittman

New member
Brian

(fast)
I think you can just send your current box in and they can upgrade it. The thing Im wondering is if there will be any harness changes.

Im waiting to hear back from some people now on it....
 

smeagol

Active member
Pittman said:
Brian

(fast)
I think you can just send your current box in and they can upgrade it. The thing Im wondering is if there will be any harness changes.

Im waiting to hear back from some people now on it....

I don't see how that will be possible, as more I/O can't be added with firmware.

Almost certain that Craig Smith (of FAST) said it couldn't be done.

There is NO official information anywhere that I know of about the new FAST, even as far as a name.
 

Pittman

New member
Well I should know by the middle of the week I will post any info I get.

Do you have more info on what parameters it will control in addition. Ive heard one of the major upgrades is more nitrous control for bottle users.
 

smeagol

Active member
just heard there will be more I/O.. not sure what that means...

FAST/DFI/Big Stuff 3 need to come out with products closer in comparison/features/capabilities to AEM/Motec... right now, none of them have anything that is even remotely close.
 

FLSY2730

New member
Brian, what makes the motec and aem so much better, I dont have a clue so fill me in . I thought the fast was pretty dam good and is on some 7 second cars out there maybe even some high 6s , so i just would like to know why the others are so much better, and i am not trying to be a smart ass, just would like to know the facts( only the facts mam) hawai five o, remember that show. :D
 

Pittman

New member
Neah its not that they are better, Its just that Brian is a tunning FrEaK that has to tinker and piddle with everything on there. :lol:

I have to agree with your observation though. I see more of the FAST units at the races than anything else. Probably cuase of ease of use. I mean, Im a complete dumbass and can figure the user end software out. Thats saying alot from some one who has to read the directions for toilet paper. :shocked!:
 

smeagol

Active member
FLSY2730 said:
Brian, what makes the motec and aem so much better, I dont have a clue so fill me in . I thought the fast was pretty dam good and is on some 7 second cars out there maybe even some high 6s , so i just would like to know why the others are so much better, and i am not trying to be a smart ass, just would like to know the facts( only the facts mam) hawai five o, remember that show. :D

Ease of use is one thing that is great... but once you start playing with it enough... you don't care so much about it, and you want more features. You give up a lot with FAST or DFI. With the better ones out there, there are some SICK features, that would really help out with performance.

Check out this page for some AEM features:
http://www.aempower.com/product_ems.asp

Granted, it's not available for Syty's... but it is setting the bar for aftermarket computers, and FAST and DFI can't even T O U C H it as far as features, flexibility, and support. I have used it, it can be a bit tricky, but they have updated the software to make it easier. There are about 20 features that just knock me on my ass when it comes to discussion about aftermarket computers, and while FAST and DFI can't compete, there are about 10 things about FAST/DFI that piss me off on the downside.

oh and also, the AEM stuff is going for ~$1500 retail, w/o wideband, but is able to work with *ANY* wideband 02 sensor - meaning the budget DIY stuff, or whatever you can use. FAST/DFI can only use their wideband 02's, which means 1000 bucks or so, added to the price.

FAST's new system promises more flexibility and input/output - more sensors, more controls.. like AEM etc. DFI just came out with their new system which doesn't offer much advances over the 5-6 year old FAST stuff... and nearly goes backwards in the datalogging department (!!!).

Anyways, the things I miss in the FAST/DFI that is available in AEM etc are as follows:

mph input - for converter lockup controls, as well as logging in a run
boost control, with very flexible parameters
high resolution, high speed logging (FAST's windows software isn't bad at all for this; DFI logging looks really crappy)
park/neutral input
more sensor logging - EGT, fuel pressure, any other sensors you can think of
flexible input/output - how about configuring an output to an LED that warns you of lean fuel at WOT, or knock retard, or an output to a shift light; or inputs for nitrous/propane tank pressure, or alky level; or being able to change fueling/boost level if nitrous/propane/alky levels go low, or being able to scale fueling if EGT's are too high. or a switch input for race versus street settings - timing/fuel/boost levels all change with flick of switch. all of these (and more) are possible in AEM, probably in Motec. FAST/DFI - nope. AEM has 2 step rev limit built in - so does DFI though. AEM now has traction control, and gear detection built in...no added cost.

Are these too much for most people? probably... but what if you got a base setup with AEM or Motec for same as FAST/DFI that did all the FAST/DFI did, and you could grow into it, adding features/tweaks as you found necessary... ?? AEM forums have great support, for all the advanced features you'd like to add... table entries and such for adding certain features. I've seen no such good support for FAST/DFI.

Now after all of this rambling, it sucks to say that you can't put an AEM on your syty without a massive amount of hassle.... the reason i post this stuff is to educate, and expect more of an aftermarket ECU.. maybe hold out if you are on the fence, to see what the future holds. Some other features coming out, esp in the Big Stuff 3 ecu.. such as....

- drive by wire - electronically controlled throttle. what if, when you overboosted, or went lean at WOT, the computer could pull the throttle back automatically? you keep it floored the whole run, the ECU does the safety stuff. Or it could pull it back for traction control? or it could do cruise control right out of the ECU ?

- block learn type of controls - what if you had tuned your setup for 12:1 AFR with the built in wideband 02, and used feedback control to tune it... but over time... your fueling system is fading, or voltage is fading, and your initial 12:1 AFR is going towards the 13:1 range... the computer starts learning this and has a learned value that is increased as the AFR goes leaner over time.

anyways enough rambling - these new systems really have me wanting to ditch our old ECU and go with something new in the future, no matter what vehicle it is in.
 

Falco

Donating Member
Brian,

Do you have experience with Motec too? It seems to be the most popular choice here in Europe. Pretty expensive, though...

How bad would be to adapt either AEM or Motec to a SyTy? I guess I should slice up a wiring harness to do it. What about with the different sensor outputs? Are they compatible with these systems?

Later,
 

smeagol

Active member
Falco said:
Brian,

Do you have experience with Motec too? It seems to be the most popular choice here in Europe. Pretty expensive, though...

How bad would be to adapt either AEM or Motec to a SyTy? I guess I should slice up a wiring harness to do it. What about with the different sensor outputs? Are they compatible with these systems?

Later,

Motec, i've only played with their software in the past. It's been very powerful for years, and always was THE ecu to use if you were serious. Not the case anymore.

AEM has a cool setup - there is no harness supplied. They make their ecu plug n play with your old setup, by having a motherboard/jumperboard that connects to the female connector appropriate for your harness application. All you get is the actual ecu. They are supposed to release a race version setup, with universal harness, pretty soon. Otherwise, you'd need to be a fairly good electrical & PC guy to make a Syty plug n play app work. They will work with you and help you to make this happen though. There are 2 parts to it - the actual wiring & soldering work, to make it physically plug n play - and the ecu setup, configuring the inputs/outputs for our harness/sensors/ignition.

FWIW, they use many GM sensors, as well the fact that the syty boost solenoid is the solenoid of choice for the turbocharged AEM users. You can configure inputs & outputs in the software, just a matter of having some knowledge of how to do it. Those basic configurations are taken care of if you own a supra, and buy a supra plug n play setup.
 

warmpancakes

New member
the reason we (DFI) dont have tractyion control is thats its not legal in any racing class regardless if its being used or not. (even bracket racing)

the 2 different settings for race/street, we can do that with just a switch because DFI supports dual fuel mapping

yes we do have a shift light output

and as fas as the AEM box where are the fast/quick cars running it?
 

smeagol

Active member
warmpancakes said:
the reason we (DFI) dont have tractyion control is thats its not legal in any racing class regardless if its being used or not. (even bracket racing)

the 2 different settings for race/street, we can do that with just a switch because DFI supports dual fuel mapping

yes we do have a shift light output

and as fas as the AEM box where are the fast/quick cars running it?

Does it support dual spark mapping? Dual fuel maps, is that all you can switch between, or is it many different parameters swapped with a switch? Going race/street setup is more than just fuel changes... race gas to pump gas, the main difference is actually timing...

AEM - i know of several 1k+ rwhp cars using it. AEM pushes imports... Accel pushes domestics... you do the math ;)

I can understand the traction control issue, honestly, it's not the biggest factor in my loving AEM. It's not even proven yet. Just more icing on the cake I suppose.

I don't understand having only 7 datalogging channels, or lack of extra channel inputs such as EGT/mph etc.
 

syclone383

New member
I have a Motec M800 and wouldn't trade it for all the other ECU's combined. A little of what makes it so good can be learned by reading the reprint from the Motec website, specifically the Tutorial section. It's a good read even if your aren't shopping for a ECU.

Within this page you will find information and definitions of strategies and theory's which pertain to MoTeC Engine Management Systems.

Sequential Fuel Injection - Sequential means that each injector for each cylinder is triggered only one time during the engine's cycle. Typically the injector is triggered only during the intake stroke. True sequential injection requires the ECU to know not only where top dead center is, but also which half of the cycle the engine is on. TDC on a 4 stroke occurs 2 times during the cycle, once on compression and once on exhaust. MoTeC references all timing events that occurs within the ECU, to Top Dead Center Compression. This generally requires an input on the engine's camshaft to provide the ECU with a SYNC signal. Once the ECU is synched, injection timing can be optimized to provide the most efficient mixing of fuel and air into the cylinder. Control of injection timing can lead to increases in midrange torque while decreasing emissions and fuel consumption.

Semi-Sequential Fuel Injection - Semi-Sequential means that 2 or more cylinder's injectors are triggered at the same time, but only 1 time during the engine's cycle. This requires the ECU to be synched with the engine's cycle. Typically injection timing is retarded from the optimum timing point for full sequential by an angle which is equal to 1/2 the angle between 2 cylinders in crankshaft degrees. On a V8 Chevrolet, the injectors for cylinders 1 and 8 would be triggered at the same time. They would be triggered 45 degrees late for cylinder number 1 and 45 degrees early for cylinder number 8. Degrees between 1 and 8 = 90 ; 1/2 of 90 = 45. Semi-sequential allows optimization of injection timing which typically leads to increases in midrange torque and a reduction in fuel consumption for equivalent power compared which Batch fire.

Injection Timing - With a synced engine which uses 1 injector in each intake manifold runner, it is possible to phase the firing of the injector so that it only sprays during the intake stroke. This allows you to introduce fuel into the intake stream precisely at the time when the airflow into the cylinder is the greatest providing the best possible atomization and the highest efficiency. MoTeC offers a user definable 2 or 3 dimensional Injection Timing adjustment table so that you can accurately match any engine's injection timing demands. Tuners can select either beginning or end of injection on which to base the timing table. This allows the tuner the ultimate in adjustability to suit any engine combination.

Batch Fire - Batch fire means that 2 or more injectors are triggered at the same time once every crankshaft revolution. If the ECU is synched with the engine's cycle, the injection timing can only be half optimized as fuel is injected both on the intake stroke and on the power stroke. Companion cylinders are paired in batch fire mode similar to wasted spark ignition modes. The advantage of batch firing is that the ECU needs only to know where TDC is. This means that a sync on the cam is not required. The disadvantage to batch firing is that the Injector Dead Time is doubled for the engine's cycle. This leads to a decrease in fuel flow and typically requires a larger, less efficient injector to be used to make up for the loss of flow.

Injector Dead Time - Injector dead time refers to the latency of the injector in producing maximum flow rate. All injectors require a certain amount of time to open completely and produce maximum flow. The amount of time is dependant on several variables including; fuel pressure, battery voltage and physical characteristics of the injectors themselves. Typically higher fuel pressure or lower battery voltage tends to increase the dead time. This leads to a reduction in fuel flow in to the engine and as a result influences the engines state of tune. Luckily MoTeC allows the user to define an injector Dead Time table if the values are known, or use a standard compensation which is known for a number of injectors. The ECU automatically adjusts the values as the battery voltage changes to ensure that the fuel curve remains constant. If a fuel pressure input is used on the system, MoTeC can compensate for variations in fuel pressure to achieve a consistent fueling even with varying fuel pressures.

Bank to Bank - Multipoint - Bank to Bank - Multipoint is the least efficient method of injecting fuel into an engine. Each injector is physically located in a position which allows its fuel output to be delivered to a single cylinder, but the fuel is injected once per rev and injection timing is of no real value even if the ECU is synched to the engine's cycle because an entire bank of cylinder's injectors are fired at the same time. The advantage of Bank to Bank is that the ECU typically does not need to be synched at all. This makes it a simple retrofit to engines which never used crank or cam triggers, because it can run the engine with simply 1 pulse per cylinder firing. Ignition timing can still be adjusted, but it is required that the engine use a mechanical distributor to distribute spark from 1 coil. No individual cylinder trimming is possible.

Individual Cylinder Trim - When an ECU is synched to the engine's cycle, it becomes possible to individually adjust a cylinder's ignition advance and also if the engine is full sequential, the amount of fuel which is supplied to that cylinder. MoTeC allows individual overall trims of each cylinder's ignition and fuel quantity in all models. In the M4 and the M800, Individual cylinder trim tables are provided which allow the tuner to vary the timing and the fueling based on RPM and Load. Typically fully variable ignition advance requires the use of multiple coils to avoid rotor-tip to cap-terminal alignment problems which may lead to spark scatter. Additionally if a single inductive type coil is used, it is possible if high fluctuations in advance occur between cylinders, that the coil does not have sufficient time to charge which leads to reduced coil output energy and possible misfire.

Bank to Bank - Singlepoint - Singlepoint involves placing the injectors in a single common injection point in the inlet path. This is typically done on roots or screw supercharged engines and some normally aspirated engines. This provides the least efficient method of using Electronic Fuel Injection. About the only method which provides less control is Carburetion. From a power standpoint, single point is not tremendously worse. Fuel consumption is typically significantly increased over any of the above methods. There is virtually no control possible as far as each cylinder is concerned and the inherent problems of delivering 2 substances with differing mass through the same passages an into the combustion chamber are present. The advantage of Singlepoint is that it does not require the ecu to be synched in any way. MoTeC makes an attempt to smooth out the fuel delivery of singlepoint by triggering the injector drives in a staggered manner. This provides a smoother more consistent delivery of fuel and reduces the instantaneous drain on the battery/charging system which can lead to ignition misfire in other systems.

Narrow Band Lambda - Narrow Band Lambda provides an output voltage between .1v and 1.0v dc based on the oxygen differential between the exhaust pipe and the atmosphere. This can give an indication of the air fuel ratio at which the engine is running however the sensor range is limited to ratios of about 14.0:1 (1.0v) and 15.4:1(.1v). At ratios beyond this range, the sensor output does not increase or decrease making it virtually useless for tuning an engine for anything other than steady state cruising. The advantage of Narrow Band Lambda comes into play while trying to keep emissions in check. The sensor provides a signal to the ECU which basically indicates either rich (output voltage above .5v air fuel less than 14.7) or lean (output voltage below .5v air fuel greater than 14.7) but really does not describe to what degree the mixture is either rich or lean. This is fits perfectly in with the need for "perturbation" of today's 3 way catalysts which need excess air to catalyze Hydrocarbon and Carbon Monoxide, and excess fuel with which to reduce Oxides of Nitrogen. Because of this requirement by the catalyst, Narrow Band Lambda Control is constantly varying the air/fuel ratio both slightly above and below 14.7:1 in such a manner that the average air fuel ratio is maintained at 14.7:1. Most engines in use today, produce peak power with air fuel ratios in the 12:1 - 13.5:1 range well below the measuring capability of a narrow band lambda sensor. It is for this reason that Narrow Band Lambda is of no help for high loads and or RPM's.

Wide Band Lambda - Wide Band Lambda provides the ECU with a specific definition of the air fuel ratio at which the engine is currently running. Wide Band Sensors are able to depict air fuel ratio's as rich as 10.5:1 and as lean as 18:1 and report the exact lambda to the ECU. This is done a number of ways. MoTeC M4 and M48 ECU's use Bosch 4 wire Wide Band Lambda sensors to measure wide band lambda. MoTeC M800/880 ECU's use either the Bosch LSU or the NTK UEGO 5 Wire Wide Band Lambda Sensor. MoTeC then uses this information to determine the actual lambda and displays this on the console and or uses it for Lambda Control if the ECU is set up to do so.

4 Wire Wide Band Lambda Sensor - This technology takes advantage of the fact that a 4 Wire Wide Band Lambda sensor's voltage output is based on not only the oxygen differential between the exhaust pipe and atmosphere, but also is dependant on the temperature of the sensor itself. Sensor impedance varies with temperature, so a MoTeC ECU measures not only Wide Band Lambda Voltage, but also the sensor impedance.

5 Wire Wide Band Lambda Sensor - This newer technology is used to determine the air fuel ratio of an engine by measuring lambda sensor output and measuring the current required to hold the sensor voltage output constant. An oxygen sensor produces voltage and a small amount of current as oxygen atoms pass across its substrate from high concentration to low concentration. The greater the flow of oxygen, the greater the voltage produced. This is the case when a rich mixture is encountered. Conversely, when current is applied to an oxygen sensor, oxygen atoms are moved from a low concentration to a high concentration or vice versa depending on the polarity of the current applied. The MoTeC M880/800 ECU's are capable of measuring this type of sensor input which offers increased speed and accuracy over the older technology 4 wire sensors. M4 and M48 ECU's can leverage the 5 wire technology by connecting a MoTeC PLM, which has a definable analog voltage output, to the Lambda input on the ECU.

Bosch LSU and NTK UEGO Sensors - Both the MoTeC M880/800 and the MoTeC PLM are capable of operating with either the NTK UEGO or the Bosch LSU-4 5 wire wide band sensors. Of the two, the NTK is most accurate. It is a true laboratory grade sensor. Its accuracy has been found to be about 1.5% better than that of the Bosch LSU. Additionally the NTK has a better response time than does the LSU again about 1.5%. The NTK is the benchmark against which the LSU is measured. The advantage of the LSU sensor is its lower price compared to the NTK. If you are doing very precise and accurate laboratory type testing, the NTK is the sensor for you. Both sensors have a life expectancy of 500 hours on unleaded fuels and that number is diminished to 50 hours using leaded fuels.

What is Lambda? - Lambda describes an equivalence value in percentage of the chemically correct air-to-fuel ratio for any type of fuel. If the air fuel ratio measured in the exhaust pipe of an engine is at the chemically correct (stoichiometric) ratio of air-to-fuel, lambda is equal to 1.0. In the case of gasoline, lambda 1.0 is equivalent to 14.7:1 air-to-fuel. Lambdas less than 1.0 indicate the engine is running richer than stoichiometric, while lambdas greater than 1.0 indicate a lean mixture. If we measure a lambda value of 1.06 and we want a lambda value of .95, we simply increase the fuel delivered to the engine (pulsewidth) by 11 percent. This will place us exactly at .95 lambda. By using the Lambda Was or the Quick Lambda functions a tuner can quickly shape the fuel table to match the engine's exact requirements.

Quick Lambda and Lambda Was - A MoTeC ECU, allows the user to define a lambda goal table based on load and rpm. The Quick Lambda function in the software allows a tuner to quickly adjust the values in the fuel control table to achieve the goal lambda, based on the lambda reported by the sensor. If the reported lambda is .98 and the goal is .93, the ECU automatically jumps to the current load site, and multiplies the value in the site by 1.05. The next time the engine runs in that site, the lambda will be .93. Similarly, Lambda Was allows a user to locate a load and rpm site in the main fuel table and enter a recorded lambda measurement from a data log. The ECU multiplies the load site value by the difference between entered lambda and the goal lambda value so that the engine will achieve the goal lambda the next time it runs on that load site. This makes tuning much faster and easier than calculating the required enrichment based on an air fuel ratio number. Of course you can manually do multiplication, division, addition and or subtraction on any site or a number of sites with only a few keystrokes, and the overall trim function allows you to trim the entire fuel or ignition table up or down based on percentage.

Lambda Control - There are two types of control methods used in closed loop fueling. Narrow band closed loop control attempts to keep the air fuel ratio "pertubating" (dithering) slightly richer and slightly leaner than stoichiometric for emissions control. In a MoTeC ECU, narrow band control is simply turned on or off based on load and rpm. Wide Band closed loop control measures the current lambda and adjusts the fuel delivered to the engine, by comparing the measured lambda to the preset lambda goal table.

Configurability - MoTeC ECU's are well known for their ability to be customized to meet the demands of nearly any application. Software configurable hardware within the ECU allows a tuner to match the requirements of any inductive or capacitive discharge type ignition available. Triggering can be done using hall effect, magnetic pickup, logic level switch or optical sensor. There are specific modes which are selectable to allow MoTeC to read LS-1, LT-1 Opti-Spark, Ford TFI, Subaru, Honda, Mazda, BMW, Nissan, Toyota, as well as aftermarket flying magnet or hall type crank triggers. If you make a change to a new type of trigger wheel, MoTeC allows you to simply redefine the signals in software. No need to send your ECU in for hardware upgrade. Every MoTeC ECU can be configured quickly so it is possible to borrow an ECU, send your calibration file to the new ECU and be up and running in merely seconds.

Data Logging - MoTeC M4 and M48 ECU's feature 512Kbyte non-volatile logging memory space. M800's feature a full Megabyte of logging space and the M880 is available with up to 4 Megabytes of logging memory. Tuners can select which items they want to log, and what rate they wish to sample. M4 and M48 can sample up to 20 times per second (.050 Seconds) while M800/880 max out at 200 times per second (.005 Seconds) Maximum logging time is dependant on the number of items being logged and the rate at which you are logging.M4 and M48 maximum logging time is 382 minutes at 1 sample per second. If the logging memory becomes full, MoTeC automatically begins logging over the top of the existing log ensuring that you will always have the most recent data available in your log when it is retrieved.

RPM Limiting - RPM Limiting can be done a number of ways using MoTeC. Software allows you to select whether your cut will be based on fuel only, ignition only, fuel with ignition 100 rpm above, ignition with fuel 100 rpm above or both fuel and ignition at the same time. An adjustable control range allows the tuner to set the harshness of the cut and an adjustable randomizer gives the tuner the opportunity to get a fully random cut no matter what number of cylinders the engine has. The overall RPM Limit sets the maximum engine rpm you want the engine to ever see. Other cuts allow starting line rev limits which typically are lower than the maximum rpm limit. Using a 9 position trim switch, MoTeC can provide you with 9 separate, driver selectable RPM Limits for ultimate adjustability to conditions without the need for a laptop to change the setting.

Oddfire tables - Tables in the ECU describe the oddfire angle in crank degrees for use on oddfire engines such as the Viper V-10, Harley Davidson V-Twin and the Chevy V-6. Simply tell the ECU the number of degrees past TDC Number 1 that each cylinder arrives at its own TDC. A special requirement for triggering is needed to run the oddfire engines. The crank input must have at least 1 tooth per TDC and they must be evenly spaced. This usually requires a 12 tooth wheel in the case of the V-6 Chevy. MoTeC CDI-8 Capacitive discharge Ignition can be used to supply the spark to oddfire engines of 8 cylinders or less controlled directly by a MoTeC ECU. For engines with greater than 8 cylinders, 2 CDI-8's can be used.

Comprehensive Online Help - All MoTeC software comes with Comprehensive online help available by pressing the F1 key on your keyboard. Whether it is Engine Management, Data Acquisition or our Data analysis software you can always access the help files through the use of the F1 key.

CDI-8 Ignition - Capacitive Discharge Ignition has been used in racing and in some automobiles for a number of years. MoTeC offers one of the industry's most advanced capacitive discharge ignition systems available. The CDI-8 is an 8 channel CD Ignition which can either run in stand alone mode (meaning it does not require an ECU to run it) or in slave mode. In slave mode, the CDI-8 receives an encoded signal from a MoTeC ECU which tells it which coil output to fire. In this mode, a CDI-8 can deliver a full energy spark at up to 1.1KHz which is enough to keep up with an 8 cylinder engine turning 16,000 rpm!

MoTeC Software - Always free from www.motec.com New software upgrades will allow additional features for your ECU. Since each ECU is produced with all of the same hardware, there will never be an issue of a feature not working with an older ECU. New features will always work with every ECU.

Security - MoTeC offers its customers the option of securing their tuning file through two methods. The first is a simple password protection which can be set on the ECU so that others are not able to make changes to the tuning file nor can they send a new file to the ECU unless they have the password. The password can be reset as often as you like, and you may choose to turn the password off at anytime but you must know the password in order to perform these functions. Additionally, MoTeC allows the tuner to encrypt a file which is stored within the ECU. In this case, the file can only be sent to an ECU which has a matching password for the encrytped file. If file encryption is used, a tuner could send an encrypted file to a customer with a matching password, and the customer would be able to send the file to the ECU without knowing the password. The customer would still not be able to view or in anyway modify the file. Data downloads can always be retrieved whether or not a password is set on an ECU.

High/Low Injection Capability - On many types or racing engines, tuners may find improved efficiency by changing the physical location of the injector in relation to the intake valve. MoTeC allows the user to run 2 sets of injectors in the inlet path and switch from one to the other with a 3 dimensional table based on load and rpm. Typically this feature is used when an engine is making substantial amounts of horsepower but requires only small amounts of fuel at low speeds. In this case, the tuner can select 2 injectors of differing flow rates, one for low speed operation, the other for high speed/power operation. MoTeC allows you to define the flow differential between the 2 injectors, so that the proper amount of fuel can be delivered out of each injector. Another way to use the MoTeC High/Low capability, is to use 2 injectors of equal flow rate, but located at different points in the inlet path. In this manner, fuel injection location can be varied at certain points in the rpm band to provide the highest efficiency. Of course MoTeC allows you to enrich or enlean the engine at the transition from 1 set of injectors to the other to provide seamless operation.

Crank Index Position - The CRank index Position is perhaps the most important timing value in the ECU. The CRiP tells the ECU where the engine is in relation to TDC Cylinder #1. The CRiP is defined as the distance in crankshaft degrees, between the reference tooth when it is aligned with the crankshaft position sensor, and Top Dead Center Compression Number 1. For example, if the reference tooth is aligned with the crankshaft sensor when the crankshaft is 55 degrees before TDC Compression Number 1, then the CRiP is 55. An easy way to determine the CRiP before startup is to rotate the crankshaft in the direction of rotation until the reference tooth is aligned with the crankshaft position sensor. Then measure the number of degrees, required to turn the crankshaft in the direction of rotation until the number 1 cylinder is at Top Dead Center of the Compression stroke. Once you determine this value, you may start the engine and enter the CRiP set screen under the Ignition menu. Use a non dial-back timing light to check the CRiP. The timing advance displayed in the CRiP set screen should match the measured value using the timing light. If they do not match, move the CRiP value until the timing does match.

Reference Tooth - The definition of the Reference Tooth depends on the type of Ref/Sync mode being used. If using missing or extra tooth type modes, the reference tooth is defined as the tooth which occurs directly following the missing or extra tooth or teeth. If using 1 tooth per TDC or Multiple tooth mode with a sync input, the reference tooth is defined as the tooth which occurs directly following the sync input.

Rotary Ignition Split - Factory Rotary engines use 2 spark plugs per rotor. Both spark plugs in a common rotor are not fired at the same time. There is a delay between the time when the leading spark plug is fired, and when the trailing spark plug is fired. MoTeC wrote special software to be able to mimic this type of ignition control for rotaries in the M4 and M800/880. A table is available to define differing amounts of timing split to suit any application and driving condition. Of course if you do not wish to use the split timing function MoTeC can accomodate that as well.

Auxiliary Tables - MoTeC Engine Management systems are extremely adaptable to differing engine requirements. One way MoTeC makes this possible is through the use of Tuner definable output controls. A 3 dimensional table can be selected by the tuner with several inputs available to use as the table axes. Typically Engine RPM, Engine Temperature, Air Temperature, Manifold Pressure, Throttle Position and Auxiliary Inputs are available to set up the table. Tuners typically use this type of control for engines which have switchable cam profiles such as the Honda V-Tec. The 3D table can be set so to Throttle Position versus RPM for example and the tuner can turn on the V-Tec based not only on RPM but also load so the cam timing can be optimized for varying loads.

Fully Variable Camshaft Timing - MoTeC is proud to be the industry leader in the aftermarket for controlling engines with fully variable camshafts. We have several special modes written to allow full control of up to 4 fully variable camshafts per engine such as the Dual Vanos BMW V8 using our M800/880 series of Engine Management Systems. Special Ref/Sync modes were written to allow the tuner to use the stock trigger wheels and sensors. Camshaft timing can be independently adjusted for each cam in 1/2 degree increments based on RPM and Load. With full adjustment of camshaft opening and closing points, the engine's volumetric efficiency curve can be stretched providing optimum cylinder filling over a much wider range of RPM, increasing the average horsepower and ultimately making the car faster.

Drive by Wire control - MoTeC is the first in the industry to adopt drive by wire throttle control using OE components. Many of the newer models of cars are equipped with electronic throttle control. MoTeC retains all of the standard redundant sensors that the factory uses for safety. In addition to very precise control of the throttle position, throttle by wire also incorporates idle speed control and traction control. MoTeC Drive By Wire is available for certain Bosch and Delphi systems using our M800/880 series of Engine Management Systems and we are working on additional Drive By Wire systems on a daily basis. If you are interested, please call to discuss your system's requirements.

Telemetry - All MoTeC products offer the ability to transmit data from the ECU using a 3rd party radio, to a PC using another radio, for real time monitoring of engine functions. The Telemetry option allows the ECU to transmit this data over the radio's and MoTeC's Telemetry Monitor software allows the tuner to view the data remotely. Note that Telemetry is for real time analysis only. No data storage is done on the PC, however the ECU will still be able to log the data.

Remote Logging - When used in conjunction with the MoTeC Telemetry option, remote logging allows the data which is monitored with Telemetry Monitor, to be stored on the PC and converted to a data format which is readable using MoTeC Interpreter, our data analysis software. Note that the Telemetry option must be enabled in order for Remote Logging to function.

smeagol said:
Falco said:
Brian,

Do you have experience with Motec too? It seems to be the most popular choice here in Europe. Pretty expensive, though...

How bad would be to adapt either AEM or Motec to a SyTy? I guess I should slice up a wiring harness to do it. What about with the different sensor outputs? Are they compatible with these systems?

Later,

Motec, i've only played with their software in the past. It's been very powerful for years, and always was THE ecu to use if you were serious. Not the case anymore.

AEM has a cool setup - there is no harness supplied. They make their ecu plug n play with your old setup, by having a motherboard/jumperboard that connects to the female connector appropriate for your harness application. All you get is the actual ecu. They are supposed to release a race version setup, with universal harness, pretty soon. Otherwise, you'd need to be a fairly good electrical & PC guy to make a Syty plug n play app work. They will work with you and help you to make this happen though. There are 2 parts to it - the actual wiring & soldering work, to make it physically plug n play - and the ecu setup, configuring the inputs/outputs for our harness/sensors/ignition.

FWIW, they use many GM sensors, as well the fact that the syty boost solenoid is the solenoid of choice for the turbocharged AEM users. You can configure inputs & outputs in the software, just a matter of having some knowledge of how to do it. Those basic configurations are taken care of if you own a supra, and buy a supra plug n play setup.
 

smeagol

Active member
As far as shift light output, is it configureable to do anything else?

I can create whatever parameters I want in AEM to make it control other functions, or come on if i overboost, or go lean, or have knock retard present... it's not just something that replaces a $50 part like a shift light.

Flexibility is the issue...
 

smeagol

Active member
warmpancakes said:
its a RPM controlled out put so anything you wanted to control

Well, exactly, it's limited to RPM.


Motec is powerful, no doubt about that. Curious on the cost nowadays - also, in the past, it was you paid X amount, and each additional feature you wanted access to had to be bought. Call up with credit card #, and you got access number for that feature.

AEM can do *most* of what you have listed, but it can't do many of those (telemetry, oddfire etc), which is why I think Motec will stay at the top of the ladder for many - especially those with *big* bucks invested. As far as bang for the buck, at the enthusiast level, FAST/DFI work... but there are more options out there, and the more technical the enthusiasts get (beyond the ' i'm an old carburetor guy, this pc stuff is all greek to me' ), they will want more. That is where I'm at, as well as many others.
 

warmpancakes

New member
We also have new stuff coming LS1 kit (6 weeks), oddfire support (9months) and many other new things i cant say yet

you could use the built in N2o control for you propane/alcochol (sp?)

there are also build in wide open throttle activated outputs for what ever you need, a/c cutout,vtec,
 
Top