New Build New goals

autoaddictions

Active member
Stock block is out time to start building up the bowtie. The plan is to build a 9.7-1 compression 375 stroke 18* monster. I have been sitting on parts collected over 2 years waiting for the stock block to reach its limit. The time has come. Diamond Pistons, Sonny Bryant Billet crank and the Baddest set of billet rods from Cunningham. Custom turbo kit 5" down pipe with 91mm billet turbo from PTE, A&L liquid inter cooler running on E85. Now that the parts are all in its time to start the machining on the block and assembly. I will post updates to this thread as the build progresses. Come spring i should have it up and running. I cannot wait to see what she can do.

Custom turbo kit!!
photo1eb.jpg

By fdeninno

Precision 91mm turbo
pte91billetc.jpg

By fdeninno

Billet wheel
pte91billet001.jpg

By fdeninno

Sweet Cunningham 1500+hp billet rods!!
img0863wh.jpg

By fdeninno

img0862jf.jpg

By fdeninno

Diamond Forged pistions with coatings.
img0860os.jpg

By fdeninno

img0861bq.jpg

By fdeninno
 

Norm

Donating Member
Re: New Build New goals

The down pipe alone makes the engine looks tiny. Killer looking pistons.
 

Silly

Banned
Re: New Build New goals


Come on now, this board is anti TH400.. I will guess 80e

Looks good though. What are suspension plans and transfer case and rear end? I have no doubt you will make stupid power, I just hope it gets put the ground.

I assume staying AWD since it does not state otherwise.
 

sharkbait

New member
Re: New Build New goals

Come on now, this board is anti TH400.. I will guess 80e

Looks good though. What are suspension plans and transfer case and rear end? I have no doubt you will make stupid power, I just hope it gets put the ground.

I assume staying AWD since it does not state otherwise.

nothing wrong with a th400 on a budget build. ....... .. . .this aint a budget build. price of the crank alone can buy my motor/turbo.

excellent job so far frank. cant wait to see it in person next month.
 

autoaddictions

Active member
Re: New Build New goals


My 4l80 was built for big power so Im not sure yet it should work fine. The trans break for a 80 is 1000.00 upgrade ouch!!. Im leaning to a 400 with trans brake and variable stall control. Thinking about using the 4l80 in my syclone.
 

autoaddictions

Active member
Re: New Build New goals

Come on now, this board is anti TH400.. I will guess 80e

Looks good though. What are suspension plans and transfer case and rear end? I have no doubt you will make stupid power, I just hope it gets put the ground.

I assume staying AWD since it does not state otherwise.

Suspension!! Not changing much. Im building a 8.5 10 bolt from an impala SS. Staying with the leafs for now. Tranfer case upgraded with George Blake stuff.

Awd for sure!!
 

Quickstop [UK]

Combating adversyty.
Re: New Build New goals

Variable stall? Have you got info? Sounds interesting.

This build looks pretty impressive. Good luck!

A Ty in the 9s beckons....
 

autoaddictions

Active member
Re: New Build New goals

Variable stall? Have you got info? Sounds interesting.

This build looks pretty impressive. Good luck!

A Ty in the 9s beckons....

With VSC you can increase our converters stall speed by as much as 1000rpm when engaging your trans brake. Let the button go and your stall drops 1000rpm. This is very usefull for spooling big turbos. In most cases no NOS is needed to spool, just a VSC.

This is how it works below..

http://www.fbperformance.com/page.asp?get=2&t=Bottom2
 

qbnkiller

Conflaguration Specialist
Re: New Build New goals

Good luck with the new build Frank. Make sure there is enough tranny cooler for that VSC you're thinking about. Talk to Joe at Pro-Torque. I guess he was at the fore-front of that whole thing years ago.
 

gt67sy

Member
Re: New Build New goals

Can't go wrong with the th400 with a brake and the vsc. That's what I have going in my 9 sec build. Looks like there are def some fast truck coming out of NJ over the winter
 

SY2455

70's Veteran
Re: New Build New goals

Variable stall? Have you got info? Sounds interesting.

This build looks pretty impressive. Good luck!

A Ty in the 9s beckons....

:hijack: The Variable Stall has been around a very long time. In the old days it was call a Switch Pitch. In the 60's you could buy a car that had it in it from the factory. You could get it in the Turbo 400 and the 2 speed trans call the Jetaway. The Jetaway trans was sometimes call the Type 300. Both Transmissions had a variable stall torque converter and a different pump then the other turbo 400 or type 300. As built by GM the torque converter was control by a rheostat that vary the stall across the whole range of the torque converter. However if you remove the rheostat and just install a switch you could change the stall speed in a instant from high to low stall and back again :tup:. For more reading if you want.

http://www.syty.net/forums/showthread.php?t=68144&highlight=Switch+pitch+turbo+400

To autoaddictions, If you don't watch out the transmission will spoil you as the 1 I have in the garage was a total blast when ever I drove the car that I had it in. I sold the car but kept the transmission and rearend for another project. The trans work great with any gear from 3.08 to 3.91. It was like having the best of both worlds :tup:. Back on topic now.
 
Top