New guy

LSdime16

dime that don't drag
I have owned my s10 for about 17-18 months, i recently blew it up, i was just wanting to find out more about these amazing little trucks, and what the differences are betwenn the turbo charged 4.3 and my 2000 vin w 4.3, i'm looking for differences internally, i realize the heads and intake are different, but are the cranks, and pistons/rods the same? Bigger journals on the turbo motors?? any help would be appreciated guys. thanks. I'd honestly like to search and interpret for myself, but wouldn't know where to start.
 

Captain Morgan

Moderated User
Re: New guy

Everything is different between the SyTy engines and your '00 4.3L
  • The blocks are different
  • Your engine is a balance shaft engine, ours is not
  • The cranks are different, yours is a lightened version due in part to the balance shaft. Journals are probably the same but the crank isnt as strong
  • Rods may be the same, but the pistons are definitely different
  • The main caps are different, ours are nodular iron

I'm sure there is plenty more but you get the drift. If youre thinking about rebuilding your blown up 4.3L into a turbo motor, the only thing you will be able to "borrow" from our engines is the exhaust manifolds, thats it.

If I was you, I would worry less about the engine and decide what computer/engine management you're going to run, because your stock computer will have to go as well and you better plan on beefing up that transmission too.
 

LSdime16

dime that don't drag
Re: New guy

i thought the syclones came with a 700r4....the 4l60e is the same thing only computer controlled, isn't it? Also, if i can't use anything from the lb4 what can i do to make my engine capable of handling 12psi? Will the intake fit my heads? I'm mostly worried about being able to push enough fuel through the piece of shit poppet things, would it be cheaper to get one of these manifold or the marine intakes that some of the guys on s10 forum use?
 

Captain Morgan

Moderated User
Re: New guy

i thought the syclones came with a 700r4....the 4l60e is the same thing only computer controlled, isn't it?
Yup pretty much. The both suck. If youre 2WD youll at least get it to live a little longer after you build it up.

Also, if i can't use anything from the lb4 what can i do to make my engine capable of handling 12psi?
Buy aftermarket stuff like we all do? We certainly dont go back to the GMC dealership and buy more stock garbage to break.

Will the intake fit my heads? I'm mostly worried about being able to push enough fuel through the piece of shit poppet things, would it be cheaper to get one of these manifold or the marine intakes that some of the guys on s10 forum use?
You already stated in your first post you knew the heads and intake were different, why are you asking now? No, it will not directly bolt on, you will have to do a conversion to the lower intake in order to get it to bolt up to 96+ Vortec heads. Buy the time you get done finding, buying and converting a stock syty intake, youll have $600 - $1000 invested in that alone.

Youre better off buying the carburetor intake for 96+ heads that Edelbrock sells and get injector bungs welded in and purchase a 90* throttle body elbow, some billet fuel rails & external regulator. You will never be able to supply or control the fuel properly with the stock fuel injection setup or computer.
 

tydye

Banned
Re: New guy

welcome to the board. friend of mine had a built little 4.3 01 i believe from an 01 sounded pretty nice, you still have options so i read....
 

the baPhoon

Active member
Re: New guy

You can build and turbo a 4.3 for a dime. Or, for way cheaper toss an ls1 in it and have more horse and better dependability.
 
Top